Examples of 'switch to position' in a sentence
Meaning of "switch to position"
switch to position: Refers to the act of changing or adjusting the placement or status of something. It could involve physical movements, reassignments, or modifications to reach a specific position or state
How to use "switch to position" in a sentence
Basic
Advanced
switch to position
Set the left rotary switch to position.
Turn the switch to position to switch the device off.
Rotate the function selector switch to position.
Turn select switch to position and preset voltage.
For continuity tests set the rotary switch to position.
Move the switch to position ON to activate the backlight.
Rotate the main switch to position.
Set the switch to position OFF on the remaining microphones.
Turn the selector switch to position n.
Move the switch to position OFF to deactivate the backlight.
Select the rotary switch to position.
Set the switch to position SLAVE for the remaining microphones.
Turn on the device by moving the speed selector switch to position.
Rotate the function selector switch to position for the chiselling function.
With the ignition switched on turn the light switch to position.
Set the switch to position LIFT.
In this case move the groundlift switch to position GND.
Move the switch to position LIFT.
In this case set the groundlift switch to position GND.
Change the switch to position REF reading of the SWR level.
For a subwoofer set the switch to position LP.
Set the switch to position I and insert the safety key.
For bass speakers or a subwoofer set the switch to position LP.
Turn the control switch to position A automatic operation.
For this purpose the set the selector switch to position LIFT.
Turn the main switch to position O to switch off the system.
Insert the plug in the power socket and turn the side switch to position I.
Set the DBBS switch to position OFF in order to switch off the bass function.
Slide the circulation pump switch to position I.
Slide the HEAT switch to position I to turn on the heat function.
Slide the electric cartridge switch to position B.
Switch to Position tab.
Turn the control switch to position E elevator.
Switch to position 1 to decrease the speed.
Slide the heating cartridge switch to position A.
Move the switch to position 1 for any continuous use.
Start the kettle by moving the switch to position I On.
Set the switch to position 1 and insert the safety key.
Set the current selector switch to position 6.
Set rotary switch to position operating mode and select "Heating.
Stop the motor by turning the switch to position 0.
Move the selector switch to position 1 before falling asleep.
Activate the dispenser turning the switch to position 1.
Set the main switch to position 0 and put on a pair of protective gloves.
When the device is cooled, the main switch to position.
Move the selector switch to position 1 or 2 before falling asleep or any continuous use.
Stop the elevator by turning the elevator switch to position 0.
After use shift the switch to position 0 and pull out the plug.
Turn the ignition on and turn the light switch to position 0 or.
Turn the switch to position B and hold it in this position spring-tensioned po - sition.
You'll also be interested in:
Examples of using Switch
Show more
The floating switch is blocking in automatic operation
Opera never survived the switch to electric
Set the switch to the correct position
Examples of using Position
Show more
Then position the unit as shown below
Verify the correct position of the gasket
Try to position cages out of direct sunlight
