Examples of 'taper angle' in a sentence
Meaning of "taper angle"
taper angle - Refers to the angle at which a surface or edge narrows gradually to a point or line
How to use "taper angle" in a sentence
Basic
Advanced
taper angle
Defines the taper angle of the extruded outlines.
The base size is then determined by the taper angle.
A suitable taper angle is in the region of two degrees.
Drag the cursor horizontally to specify and preview the taper angle.
The taper angle of both faces is the same.
Prior art thread milling tool designs have combined a taper angle with helically oriented flutes.
Specifies the taper angle based on two specified points.
The tapered cam follower rollers 7 have a taper angle B.
This activates taper angle controls that are depending on the cutting speed.
The tapered formation for example defines a taper angle of 1 to 10 degrees.
To taper angle.
For example, you can specify an extrusion direction, a path, or a taper angle.
The required taper angle is then produced only by the other sheet.
A first section 14, an entrance section, is a hollow cone dimensioned as a Morse taper with a taper angle a.
The taper angle may vary somewhat along the length of the bore.
See also
The taper time depends on the taper angle and the rotational speed of the rotor.
The taper angle applied to the extrusion is the distance between the two specified points.
In various embodiments, the head taper angle is steeper than the taper of the neck.
The taper angle is determined depending on flexibility of the tape T.
When using the TEACH key, the taper angle is automatically calculated.
Sets the taper angle based on two points you specify in the drawing area.
In view of the taper angle a - Fig.
The low taper angle results in a jet, rather than a spray, of water at the outlet.
A drill bit as claimed in Claim 8, wherein said back taper angle is positive.
The taper angle a will dictate whether the sleeve is self locking or non-locking.
Preferably the taper includes a taper angle of between approximately 1 and 10 degrees.
Taper angle control can only be used if you have a 5-axis cutting machine.
In one or more embodiments, the taper angle is about 7 °.
Of course, the taper angle will depend on its total length in the combustion zone.
Optionally, the tapered male portion includes a taper angle of between 1 and 10 degrees.
Alternatively, a single taper angle may be applicable to both the outlet and inlet flow channels.
Further, the leading end 20a is provided with a taper angle A2 Fig.
Especially, the taper angle may increase from the center to the outer of the apparatus.
Helical shape cutter blades may have a core taper angle ranging from 20 to 30 degrees.
Alternatively, the taper angle may vary along the length of the first and / or tubular extension.
It is believed that a negative taper angle of about 1.5 ° is more reliable.
Also the taper angle is typically less than 30 degrees and optimally less than 15 degrees.
As described previously, the collar 's taper angle may differ from that of the base 118.
The taper angle B is approximately 1 ° relative to vertical.
Specify height of extrusion or [ / / Taper angle ], Specify a distance or enter p.
The first taper angle is 10 degrees or greater and 60 degrees or less.
Negatively tapered portion 39 has a taper angle a2, as illustrated in Figure 4.
Typically the taper angle is in the range 5 to 15 degrees.
It has been found that a taper angle B of 30 ° is suitable.
A negligible back taper angle is shown as 69 in the embodiment shown in Figure 12.
The tapered top end 52 defines a taper angle B relative to the vertical axis 94.
In some embodiments, first taper angle 50 is between about ninety and about sixty degrees.
More preferably, the taper angle B is in the range of 1-3 percent.
