Examples of 'tensile forces' in a sentence
Meaning of "tensile forces"
tensile forces: The forces that stretch or pull an object, typically used in engineering and physics to describe the stress on materials under tension
How to use "tensile forces" in a sentence
Basic
Advanced
tensile forces
Only shearing and tensile forces are permitted.
This is done on the action of pressure or tensile forces.
This shape eliminates tensile forces in the concrete.
Hereby it is possible to transmit greater tensile forces.
Thus the tensile forces to be overcome are doubled or quadrupled.
The two materials act together in resisting tensile forces.
Tensile forces must be enormous.
In such cases the coupling sleeve is exposed to high tensile forces.
Very large tensile forces must be exerted over the outer sheath.
Such foundations can be subject to very high compressive and tensile forces.
It is also preferable to balance the tensile forces between the multiple tendons.
The tensile forces may be applied generally parallel to the fill direction.
During the winding of the yarn the bridge is subjected to tensile forces.
This geometry leads to tensile forces especially in the areas denoted by a circle.
Two lines are responsible for the transmission of the tensile forces.
See also
The resulting tensile forces may also require additional reinforcement in slabs or across joints.
This provides a very strong arrangement that can withstand large tensile forces.
The leaves are subjected to tensile forces which separate the lamina from the stem.
The tensile forces affecting pile foundations are usually transferred to the bedrock by rock anchors.
The locking member thus takes up the tensile forces acting on the pipe coupling.
Equal tensile forces across a compression step assures zero tension at the midpoint of compression.
The inventive method provides substantially equal longitudinal tensile forces across a compression step.
Tensile forces associated with lifting and pulling ;.
Supporting ribs may also apply tensile forces to structures supported by multiple supporting ribs.
Prehoistable navigation lights shall be tested for dimensional stability with the tensile forces indicated below.
Where the tensile forces are concentrated, orientation will start.
When a crack forms in the construction surface tensile forces act upon the lower layer.
The tensile forces generate cracks there, finally resulting in separations.
The tube contracts from the effect of surface tensile forces and its diameter considerably reduces.
These alternate forces may in particular be bending forces and / or tensile forces.
Exact control of very high tensile forces on large surfaces!
For example, tendon cells experience largely tensile forces.
Dropping, falling, pressure or tensile forces could destroy or at least limit the.
In other words, we are referring here to tensile forces.
In this geometry, the shear and tensile forces would be divided proportionately.
Bone is not nature 's optimal substance with which to resist tensile forces.
Longitudinal tensile forces from starting and acceleration, as well as compression from braking.
However, their resistance to tensile forces is limited.
In some embodiments bend regions 24 are permanently deformed by the applied tensile forces.
In the lower part parasitic tensile forces are generated, again indicated exemplarily by a circle.
If a loop is selected which is highly flexible, it may transmit tensile forces only.
In contrast, sheer or tensile forces can easily form cracks in ceramics and cause failure.
While towing, take care to avoid impermissibly high tensile forces or jerky loads.
The tensile forces will, of course, increase with increasing thicknesses of the silica layer.
In particular, the fibers of the paper are also able to receive high tensile forces.
These tensile forces cause delamination of soft-cored insulation panels if transmitted through the panels themselves.
The tie members 5 are long and flexible members able to withstand tensile forces.
These tensile forces are shown in Figure 8.
The greater the tenacity, the more the fibre resists high tensile forces.
The transversely-directed tensile forces Zq thus determined must be verified in the adjacent structural elements.
You'll also be interested in:
Examples of using Tensile
Show more
Mechanical tensile test prehoistable navigation lights
The main advantages of the tensile test are
Tensile test on parent material of the bottom
Examples of using Forces
Show more
There are no external forces applied on the device
Forces nouvelles revenues from taxation of cocoa
The person who forces you is not me
