Examples of 'tensile load' in a sentence
Meaning of "tensile load"
tensile load: This phrase is used in engineering and physics to describe the magnitude of stretching force that a material can withstand before breaking or deforming. It is a key factor in assessing the strength and durability of structural components
How to use "tensile load" in a sentence
Basic
Advanced
tensile load
The total elongation at maximum tensile load.
The maximum tensile load of the cargo tiedown rings is.
The first load is the tensile load.
The tensile load must be determined and applied with precision.
Maximum permanent tensile load.
A tensile load was applied to the substrate using a united tensile testing system.
Tensile stress is a resistive force developed by a material bearing a tensile load.
The tensile load on the belt is transferred by shear through this weld.
Creep occurs when a metal is subjected to a constant tensile load at an elevated temperature.
Elongation is a measurement of a material 's elasticity up to its breaking point under a tensile load.
The load flanks support the axial tensile load on the threaded connections.
The termination fitting body captures and holds the resin frustum plug under a tensile load.
The anchoring devices transfer the tensile load of the cable to the structure.
Tensile Strength is the force at which material breaks into two pieces under tensile load.
This is desirable in the measurement of tensile load in previously installed fasteners, for example.
See also
The lock device is used with a stranded cable which has a given tensile load capability.
The jacket 30 is used to carry the tensile load experienced by the belt during operation.
A 5mm screw is threaded into the anchor and an increasing tensile load is applied.
All specimens were subjected to a monotonic tensile load test under quasi-static conditions and room temperature.
However, the initial condition of the repaired tendon does not withstand any tensile load.
In these products, the hinge pin places a tensile load on the barbed cantilevered arms.
In other words, both the strength components and the strength members carry the tensile load.
When fastened, the fastening system carries a tensile load around the article waist.
Thus, where high tensile load capacity is important, a connector-to-connector lock is preferred.
The modulus of the frustum plug also increases with tensile load on the member.
Tensile members 20 bear a tensile load imposed upon the belt during operation.
If they are MD yarns, one or both layers can be tensile load bearing yarns.
A constant tensile load test of the material gave a result indicating no fracture after 700 h.
In order to account for the torque, the tensile load is taken as Pd.
Thus, tensile load is borne by the tension bolt, end cap and framing member.
The Twaron ™ layer carries almost the full tensile load because of its comparatively high stiffness.
Failure of double eye ( fork ) in double shear due to tensile load.
A suitable tensile load is about 50 % of the strength.
All joints were noticeably degraded after bending under a tensile load of 78 kN.
At this time, a tensile load is applied to the first link shaft 221.
This " fixed " end can resist a certain application of a tensile load.
With a tensile load applied, the anchor begins to loosen at about 360kg.
The short side should suitably have a strength that withstands a tensile load of 100 kg or more.
The tensile load of the Sion will be 750 kilograms.
FIG . 4 is a graph showing a relation between tensile load and elongation in a cord ;.
After bending at tensile load of 78 kN only one joint ( INV2 ) was slightly cracked.
In some embodiments, the collagen membrane has maximum tensile load strength of greater than 20N.
During flexing ( at 5.2 Hz ) the high modulus cord-layer carried practically the full tensile load.
After 4 weeks, PLA sustained higher maximum tensile load than PLAGA.
In a typical example, a 6m length strip may be subject to a maximum tensile load of 15 to 20kN.
You'll also be interested in:
Examples of using Tensile
Show more
Mechanical tensile test prehoistable navigation lights
The main advantages of the tensile test are
Tensile test on parent material of the bottom
Examples of using Load
Show more
You can load up to five discs at once
Suppose you walk by with a load of cement
Lower the load to the bottom point
