Examples of 'tensile tests' in a sentence
Meaning of "tensile tests"
Tensile tests are a type of mechanical test used to determine the strength and elasticity of a material. They involve applying tension or stretching force to a sample until it breaks or deforms. Tensile tests are commonly used in engineering and manufacturing to evaluate the quality and performance of materials, such as metals, plastics, and composites
How to use "tensile tests" in a sentence
Basic
Advanced
tensile tests
Tensile tests were performed on the test articles.
Heat resistance with hot tensile tests.
Tensile tests were carried out to verify these results.
The hot ductility was measured in hot tensile tests.
Tensile tests for routine inspection.
Universal or for tensile tests.
Wide tensile tests on base metal.
These assemblies were both subjected to bending and tensile tests.
Tensile tests were performed as described in the testing section.
The mechanical properties characterization of was through uniaxial tensile tests.
Tensile tests were run following the gel formation.
The calculation results were validated with tensile tests.
Tensile tests show that ruptures occur in this region.
This hypothesis appears to be confirmed by tensile tests on cylindrical specimens.
Tensile tests were preformed as described in the tensile test section.
See also
The data in the table have been substantiated by tensile tests.
Tensile tests were also performed to assess the weldability range.
The method used combines tensile tests and isothermal relaxation.
Tensile tests were performed on all of the samples exposed to lubricating oil.
Filament tensile tests.
Tensile tests and humidity aging tests were performed on these handsheets.
A third route is based on the use of tensile tests on large specimens.
Room temperature tensile tests were conducted on the solution treated bars.
Creep resistance using a ranking of results from slow tensile tests.
Tensile tests were also performed to analyze the temperature dependence of the composites.
The tests can be described as tensile tests at relatively high strain rates.
Tensile tests on polycrystals enlighten the diversity of macroscopic responses observed in alloys.
The characterization was carried out by uniaxial tensile tests and fracture toughness.
Tensile tests in air under the same experimental conditions were used as a reference.
The fibers were then conditioned for a day before running tensile tests.
Tensile tests are consisted of tests on both the straight and folded samples.
These material characteristics have to be determined by carrying out standardized uniaxial tensile tests.
Tensile tests were performed on the material after it was stripped from the wire.
The specimen width has a clear influence on the results of largescale tensile tests.
The tensile tests were carried out in the direction of the warp threads.
Compression tests were also performed on the dogbone specimens after the tensile tests.
Tensile tests validate the use of the energetic strategy for this alloy.
The tensile properties of the welded panels were determined using standard tensile tests.
Tensile tests on this copper allow us to characterize the mechanical behaviour of the material.
To evaluate the mechanical properties were performed tensile tests by dynamic mechanical analysis technique dma.
Impact tensile tests have demonstrated comparability between real and simulated microstructures.
Samples that showed better results were subjected to tensile tests and the corrosion tests.
Room temperature tensile tests were conducted on the solution treated titanium alloy sheets.
We shall describe below the assembly of the specimen for conducting the tensile tests.
These tensile tests enable determination of the elasticity stresses and the properties at break.
The mechanical tests performed on the testpieces machined in the parts are mainly tensile tests.
The results of room temperature tensile tests are tabulated in Table III.
Multiple cracking tests were performed inside a SEM through bending or tensile tests.
Tensile tests shall be carried out as follows,.
CSM has also measured the rate of crack propagation and has carried out tensile tests.
You'll also be interested in:
Examples of using Tests
Show more
These tests are now not thought to be necessary
Your cooperation in these tests is greatly appreciated
God tests our faith in many ways
Examples of using Tensile
Show more
Mechanical tensile test prehoistable navigation lights
The main advantages of the tensile test are
Tensile test on parent material of the bottom
