Examples of 'tension test' in a sentence
Meaning of "tension test"
Tension test: A laboratory test used to determine the strength and behavior of materials under tension forces. It is commonly used in material science and engineering to evaluate the quality and performance of materials
How to use "tension test" in a sentence
Basic
Advanced
tension test
This material was characterized by a tension test at room temperature.
Tension test without failure.
The tensile elongation of a cured resin is obtained by the following tension test.
A creep test is a tension test run at a constant load and temperature.
The maximum tensile stress sustained by the specimen before failure in a tension test.
Tension test shall.
The tensile test specimen after the heat treatment is subjected to a tension test once again.
The flatwise tension test is a well known method in evaluating the strength of honeycomb sandwiches.
Threshold pressure test with reduced surface tension test liquid,.
The Direct Tension test measures percent strain at low temperatures.
Finally, the optimised combination of heat treatments is tested with tension test bars.
The Material Tension Test employs the equipment listed below.
Thickness specimens, each set shall represent a single tension test of the full pipe thickness.
The tension test conducted a room temperature gives the following results,.
The individual ( square ) data points represent tension test results for micromachined guidewires.
See also
Compression, tension test and fatigue tests were use for evaluated the mechanical properties.
Product has safety latch can achieve 3 times of rated load tension test without wire damage.
The tension test conducted at room temperature on the resulting material gives the following results,.
EPMATHMARKEREP Fig . 2 is a view showing an outline of a method of a cross tension test.
Is the tension test and this tension test is described in the ASTM standard E8.
Maximum Draw - Performed on the Gottfert Rheotens instrument described for the melt tension test.
The compact tension test is now widespread in usage and is described in the J. Mater.
Fig . 1 is a view showing an outline of a method of a shear tension test.
The Product Tension Test uses the following equipment and materials,.
FIG . 1 is an illustration of an outline of a method of a shear tension test.
A tension test is performed on the tensile test specimen, and given a tension prestrain of 4 %.
Characterization of the resulting material, by tension test at room temperature, give the following results,.
However, for tension test specimens, arc-like tension specimens were extracted from the steel pipes.
High strength, support the weight of 300kg through tension test.
Characterization by tension test at room temperature, of the resulting material, gives the following results,.
Fig . 6 shows a schematic tension force measurement setup 600 to perform such a tension test.
Therefore, the crack length formed in the tension test is preferably less than 1000 µm.
Bond strength was determined at ages ranging from 3 to 365 d using a small-scale uniaxial tension test.
Figure 1 is a view of a round tension test specimen ( according to the ASTM standard E8M ) ;.
You'll also be interested in:
Examples of using Test
Show more
Mechanical tensile test prehoistable navigation lights
A test with tripping is compulsory on installation startup
Before the test we had art class
Examples of using Tension
Show more
The tension between them was just wonderful
And constant shoulder tension creates a hunchback
Belt tension is controlled by means of an automatic tensioner
