Examples of 'tensioning lever' in a sentence
Meaning of "tensioning lever"
tensioning lever - A tensioning lever is a mechanical tool or device used to adjust tension in a system, such as tightening or securing something in place
How to use "tensioning lever" in a sentence
Basic
Advanced
tensioning lever
The tensioning lever can be pivoted upwards.
The latter therefore constitutes the hinge pin of the tensioning lever.
Tension the drive belt by moving the tensioning lever in the direction of the arrow.
This maximum tension may be particularly difficult to overcome when opening the tensioning lever.
Pull the tensioning lever back to raise the upper drum again and tauten the belt.
To loosen the sanding belt, push the belt tensioning lever forwards.
Return the belt tensioning lever to the Tight position.
FIG . 6 shows a second embodiment of a complete boot without the buckles and tensioning lever.
With slide and tensioning lever Shade cover.
Tensioning lever for saw-table extension.
Re-tension the belt by moving the belt tensioning lever to the Tight position.
Press the tensioning lever 9 back into its initial position.
A small idle deviation welding element 36 is pivoted to the free end of the tensioning lever 37.
Rotate the blade tensioning lever clockwise until it stops, as.
The boot can be retightened by the auxiliary lever 31 without first opening the tensioning lever 9 '.
See also
To tighten the tensioning lever, turn the nut on the tensioning lever clockwise.
In this notch, a link rod 7 is articulated about a pin 8 which passes through the tensioning lever.
Lock in place by pushing tensioning lever 39 down again.
Push the tensioning lever to position ( B ) to tension the sanding belt.
The device includes as already stated a tensioning lever 5, which is hinged onto the drum 4.
It has a tensioning lever 19 similar to the tensioning lever 14.
FIG . 3 shows part of the same boot with the tensioning lever open.
FIG . 14 shows the same tensioning lever in the partially open or closed position.
Undo the fixing screw ( C ) of the tensioning lever.
Move the belt tensioning lever ( 5 ) to the front.
The rotation of the auxiliary lever 11 is limited by a stop 14 formed on the tensioning lever 9.
This device 8 consists essentially of a tensioning lever 9 hinged on a support piece 10 FIG.
Move the belt tensioning lever ( 5 ) to the front position A.
Make sure that the belt tensioning lever ( 5 ) is.
Move the belt tensioning lever ( 5 ) to the rear position B.
Make sure that the belt tensioning lever ( 5 ) is in the position.
FIG . 15 shows the same tensioning lever in the closed position.
In the position shown in FIG . 10 the tensioning lever 9 ' can moreover be very easily opened.
You'll also be interested in:
Examples of using Lever
Show more
Do not lift lever during brewing cycles
Lever can be adjusted to a different lever angle by
Open the lock lever to unlock footplate
Examples of using Tensioning
Show more
Tensioning of chains or ropes and rear attachment
Turn this quick tensioning device clock
The tensioning force can be continuously adjusted
