Examples of 'terminal screws' in a sentence
Meaning of "terminal screws"
Terminal screws are the screw-type connectors found at the end points of electrical wiring in devices or appliances. They are used to secure and connect the wires to the terminal points for proper electrical conduction
How to use "terminal screws" in a sentence
Basic
Advanced
terminal screws
Ensure that the terminal screws are tightly.
Do not allow slackening of the terminal screws.
Tighten the terminal screws securely.
Tightening torque for the terminal screws.
Tighten the terminal screws with a defined torque.
Connect bell wire to the operator terminal screws.
Fasten terminal screws with torque.
Vibration may sometimes cause terminal screws to loosen.
Tighten terminal screws and busbar bolts if necessary.
Firmly fi x the wires with the terminal screws.
Terminal screws in open position.
Use an appropriate screwdriver to tighten the terminal screws.
Firmly tighten the terminal screws to prevent them from loosening.
Over tightening can damage the terminal screws.
Ensure that the terminal screws are tightly holding all wires in place.
See also
Use an appropriate screwdriver for tightening the terminal screws.
Do not loosen the terminal screws further than the mechanical stop.
Fix the wires securely with the terminal screws.
Unscrew the terminal screws and remove the wires that need changing.
Firmly fix the wires with the terminal screws.
Loosen the three terminal screws on the garage door opener used for.
Use the correct screwdriver to tighten the terminal screws.
Be sure to tighten any unused terminal screws within a tightening torque range.
Connect the bell wire to the opener terminal screws.
Loosen the terminal screws and slip each wire beneath its matching terminal.
Use the correct screwdriver for terminal screws tightening.
Tighten the terminal screws and replace the pushbutton in the door jamb or wall.
Connect bell wire to the opener terminal screws as follows.
The connection with terminal screws enables commissioning without special tools in a short time.
Always use two wrenches for the terminal screws.
A locking bracket protects the terminal screws of the clamp against unauthorised or unintentional loosening.
The block is provided with posts mounting terminal screws.
Connect the bell wire to the terminal screws on the motor unit panel.
Use a proper screw driver for tightening the terminal screws.
Receiver terminal screws and the antenna are located on the back panel of the opener.
Used the correct screwdriver for terminal screws tightening.
Loosen the terminal screws using a screwdriver, insert.
See the table below for tightening torque for the terminal screws.
Over-tightening the terminal screws may break them.
See the table below for tightening torques for the terminal screws.
Loosen the three terminal screws on the receiver labeled 1.
Check that the links are correctly fitted and that the terminal screws are tight.
Remove the 3 lower terminal screws from the terminal block.
After connection, fix the cable by turning the cable terminal screws.
Loosen the 3 lower terminal screws from the terminal block.
Once the connections have been made, tighten all the terminal screws fully.
Re-tighten the terminal screws on the garage door opener and.
It is highly recommended to regularly check and re-tighten the terminal screws over time.
Over-tightening the terminal screws can damage the screws.
Separate white and white / black wires suffi ciently to connect to the operator terminal screws.
You'll also be interested in:
Examples of using Terminal
Show more
Oil storage terminal and port infrastructure
Police request a clearer path to the terminal
I saw a whole roomful of terminal cancer on my way in
Examples of using Screws
Show more
The screws are provided in the literature pack
Fully tighten screws with hex wrench
Screws are visible on the burner control panel
