Examples of 'test meter' in a sentence
Meaning of "test meter"
Test meter is a device used to measure or evaluate the characteristics, performance, or values of a particular object or system
How to use "test meter" in a sentence
Basic
Advanced
test meter
Upon insertion into the test meter.
It is used to test meter and test strip performance.
Gas volume was measured with a wet test meter.
The test meter includes an electronic circuit and a signal processor.
Method of ensuring date and time on a test meter is accurate.
The test meter measures a plurality of test current values during the test time interval.
The volume of effluent gas was measured by wet test meter.
The test meter applies a test voltage between the working electrode and the reference electrode.
Such exposure enables electrical contact to a test meter during use.
Hand-held test meter with deep power conservation mode.
The volumes of the bags are measured using a wet test meter.
Secondly, the test meter may measure the cell current.
The electrochemical system can include a test strip and a test meter.
Hand-held test meter with analytical test strip ejection mechanism.
Shape memory alloy ejection mechanism for ejecting a test strip from a test meter.
See also
In one embodiment, the hand-held test meter may comprise twelve electrical loads.
Such determinations can be achieved using an analytical test strip and test meter combination.
Hand-held test meter with an operating range test strip simulation circuit block.
In electrochemical terms, the function of the test meter is twofold.
Dry test meter 28 is used to measure accumulative gas flow.
During use, a single test strip is typically inserted into a test meter.
Figure 5 is a simplified schematic showing a test meter electrically interfacing with portions of the test strip ;.
However, applying a sinusoidal test voltages results in a more complex and expensive test meter.
FIG . 5 illustrates a simplified schematic showing a test meter electrically interfacing with the test strip contact pads ;.
However, applying a sinusoidal test voltage results in a more complex and expensive test meter.
Hand-held test meter with electro-magnetic interference detection circuit.
This eases operation of the hand-held test meter for a user.
During the ESD check mode, test meter 200 preferably continuously measures a current reading on a predetermined schedule.
In another aspect, we have devised a system that includes a test strip and a test meter.
FIG . 5 is a simplified schematic showing a test meter electrically interfacing with the test strip contact pads ;.
Figure 1 illustrates an exemplary analyte measurement system including an analyte test meter and test strip.
Fire pump test meter Turbo-Lux 2.
During use, a single analytical test strip is typically inserted into a hand-held test meter.
Test meter 100 can also be adapted to detect the presence of fluid within reaction chamber 61.
Of the hand-held test meter.
Test meter 100 applied a potential waveform as shown in Figure 6.
Figure 2 is a functional block diagram of a test meter and a test strip ;.
Test strips 62 were tested on test meter 100 using a glucose test time interval TG of 5 seconds.
Inserting a co-facial multi-analyte test strip into a test meter such that,.
As a result of first test voltage V1, test meter 200 may then measure a first test current I1.
In step 1310, an analytical test strip is received using an electrical connector of a test meter.
Because the test strip 62 is initially dry, the test meter 100 measures a relatively large voltage.
The flow meter 86 was a rotameter, and the totalizer 88 was a conventional flow totalizer / dry test meter.
As a result of second test voltage V2, test meter 600 may then measure a second test current I2.
The dummy corrections 333 can include phase and gain modifiers of the analytical test meter 180.
Please see the instructions supplied with the FSD-100 Smoke Detector Test Meter for more information.
FIG . 5 is a simplified annotated schematic diagram of a transimpedance amplifier sub-block of hand-held test meter 100.
Referring to Figure 2, an exemplary internal layout of test meter 200 is shown.
FIG . 2 is a simplified block diagram of various blocks of the hand-held test meter of FIG . 1 ;.
You'll also be interested in:
Examples of using Test
Show more
Mechanical tensile test prehoistable navigation lights
A test with tripping is compulsory on installation startup
Before the test we had art class
Examples of using Meter
Show more
And the awkward meter goes up another notch
Meter reading without need to enter premises
Replace the meter case service door
