Examples of 'thickness of each layer' in a sentence
Meaning of "thickness of each layer"
thickness of each layer: Describes the measurement of the depth or width of individual layers within a structure or material. This phrase is often used in contexts related to construction, manufacturing, or geology
How to use "thickness of each layer" in a sentence
Basic
Advanced
thickness of each layer
The thickness of each layer is then found.
This refers to the thickness of each layer.
The thickness of each layer is different.
An upper window is provided having a thickness which defines the thickness of each layer.
The thickness of each layer may be identical or different.
The method of the invention enables one to control the thickness of each layer deposited.
Thickness of each layer of the earth.
These were respectively taken as the maximum thickness and the minimum thickness of each layer.
The thickness of each layer of particulate material can vary.
Thus, a very precise control of the thickness of each layer is possible.
The thickness of each layer can be controlled within a fraction of a wavelength.
It is not necessary to obtain a variation in the thickness of each layer deposited, however.
The thickness of each layer can be easily controlled by a skilled person.
In addition, the maximum stress reached decreases with increasing thickness of each layer.
Measure the thickness of each layer and the total sample.
See also
Table 1 below shows conditions such as the composition / components and thickness of each layer.
The thickness of each layer of the multilayered structure is not particularly limited.
A software program can then measure, on the projected image, the thickness of each layer.
A thickness of each layer herein means a thickness in a thinnest área of the container body.
The film composition and the thickness of each layer is listed in Table 1.
The thickness of each layer was measured in the thinnest área in the delaminatable container.
If the pitch is designated by a, the thickness of each layer is a/2.
Further, the thickness of each layer is shown in a lower line.
Every 3D printer has a defined resolution, which is the thickness of each layer.
This step also defines the thickness of each layer and compensates for different inkjet dispensations.
The thickness of each layer based on crystalline nickel oxide is preferably,.
Furthermore, the thickness of each layer may be different.
The thickness of each layer is not particularly limited but is preferably 10 µm or more.
Moreover, the film thickness of each layer may be different.
The thickness of each layer in the multi-layer body may be the same or different.
To avoid cracking, the thickness of each layer should not exceed to 1 mm.
A thickness of each layer is shown in Table 1.
In addition, the thickness of each layer can be readily controlled.
The thickness of each layer of film would typically be in the range 50 to 100 micrometres.
The thickness of each layer used in each film is shown in Table 3.
On the thickness of each layer in the optical reflector 's stack ;.
The thickness of each layer may be 10 nm for about a hundred periods.
The thickness of each layer applied was approximately 0.02 inch.
The thickness of each layer of film would typically be in the range 50 to 100 micrometers.
The thickness of each layer within the multilayer structure is between 5 nm and 500 nm.
The thickness of each layer is less than 150 micrometres and is preferably between 1 and 10 micrometres.
You'll also be interested in:
Examples of using Layer
Show more
A layer is displayed independently from other layers
The usage of second layer additional purchase
Every layer seems to beat to a different tune
Examples of using Thickness
Show more
Minimum recommended thickness of zinc vs thickness of steel
Thickness of tanks made with double walls
Reduction of wall thickness and additional protection
