Examples of 'thickness of layer' in a sentence
Meaning of "thickness of layer"
Thickness of layer: Refers to the measurement of the depth or width of a specific material or substance that is deposited or spread in a single coating
How to use "thickness of layer" in a sentence
Basic
Advanced
thickness of layer
A gold coating in which thickness of layer is less than seven millionths of an inch.
Typical absorption spectrum thickness of layer,.
The thickness of layer A and layer B can be the same or different.
The drawing or elongating also results in a decrease of the thickness of layer 66.
As a function of the results obtained, the thickness of layer 9 subject to relaxation is adjusted.
Additionally, transmittance of the lens can be controlled by varying the thickness of layer 1.
The thickness of layer 1 may be chosen to suit the desired application of the fabric.
Additional elements for selecting the nature and the thickness of layer 31 will be detailed hereafter.
The thickness of layer 2 can vary between a few microns and a few dozen microns.
According to an embodiment, the pores cross the entire thickness of layer 24.
The thickness of layer 52 must be approximately equal to the Fe impurity implantation depth.
The spacers obtained have a width equal to the thickness of layer 116.
Thickness of layer usually 8µm, can be customized.
In other words, the depth h of these trenches is less than the thickness of layer 13.
Constraints on the thickness of layer 30 to be sacrificed are thereby avoided.
See also
Trenches 12 are formed across the entire thickness of layer 11.
If the thickness of layer b is less than 10 µm, no sufficient rigidity may be obtained.
Etching is performed over the entire thickness of layer 152.
The thickness of layer 20 then varies between 1 and 5 um depending on the speed of rotation.
In another preferred embodiment, the thickness of layer ( a ) is less than 15 micrometers.
The thickness of layer 26 typically ranges from about one to about three mils.
It should be noted that the thickness of layer 242 is here 2 micrometers.
The thickness of layer 30 is exaggerated in Figure 2 compared to the dimensions of other elements.
As illustrated in FIG . 6D, etch depth e is greater than the thickness of layer 44.
The thickness of layer S is preferably 700 micrometers maximum in order to ensure the required protection.
In addition, in said preferred embodiments, the thickness of layer ( L2 ) is smaller than 1 mm.
The thickness of layer ( a ) is preferably at least approximately 15 microns.
The thickness of layer 25 is about a micron.
The thickness of layer 14 of material is sufficient to fill cavity 12.
The thickness of layer 20 is generally also comprised between 1 and 5 um.
The thickness of layer 62 is preferably less than that of layer 12.
The thickness of layer ( b ) preferably does not exceed approximately 100 microns.
The thickness of layer 154 ' is greatly exaggerated in the Figure for clarity purposes.
You'll also be interested in:
Examples of using Layer
Show more
A layer is displayed independently from other layers
The usage of second layer additional purchase
Every layer seems to beat to a different tune
Examples of using Thickness
Show more
Minimum recommended thickness of zinc vs thickness of steel
Thickness of tanks made with double walls
Reduction of wall thickness and additional protection
