Examples of 'thickness of the upper' in a sentence
Meaning of "thickness of the upper"
thickness of the upper - refers to the measurement or dimension of the top part of something, usually a physical object
How to use "thickness of the upper" in a sentence
Basic
Advanced
thickness of the upper
Kingpins are manufactured in different lengths to match the thickness of the upper coupler.
The wall thickness of the upper jacket is bigger than that of the lower jacket.
This etching is effected over the entire thickness of the upper film.
The increased thickness of the upper portion also helps the cage withstand corrosion.
The film appears therefore as a simple fluctuation of thickness of the upper layer 2.
The thickness of the upper layer is typically on the order of 3 microns.
The decoration is produced through the thickness of the upper part and in a programmed pattern.
The thickness of the upper curved member 8 is, for example, less than 2 mm.
Advantageously, the intermediate layer is at most the thickness of the upper layer.
Herein, the thickness of the upper layer of skin will be described below.
The notches 17 extend axially across the entire thickness of the upper core plate.
The resulting thickness of the upper silicon wafer is then around 2 to 10 microns.
The width of this slot is slightly greater than the thickness of the upper portion 42.
Moreover, the thickness of the upper walls of the partitions is advantageously between 0.5 and 15 mm.
Notch 25 has a height which is less than the thickness of the upper face 6.
See also
In repose was measured, length and thickness of the upper lip and intercomissural distance.
The thickness of the lower plate A11 is thinner than the thickness of the upper plate A10.
Machining reduced the thickness of the upper stratum to 50 microns.
This wall 26 extends throughout the thickness of the upper part 11.
This distance D depends on the thickness of the upper intermediate part 3.
A slot 110 extends through the entire thickness of the upper wall from the proximal end.
FIG . 4 shows a cross-section along the thickness of the upper according to the second embodiment.
Thus, it is possible to reduce the thickness of the upper wall portion ( 12 ).
In an illustrative embodiment, the average thickness of the upper wall 7 may be approximately 0.5 min.
A mechanical sensor according to claim 1, wherein thickness of the upper part ( A ) is about 1 micron.
Z 1 corresponds to the thickness of the upper useful layer 10 A.
You'll also be interested in:
Examples of using Upper
Show more
Put the upper plate on the stove
Put light items in the upper basket
The upper section has an internal tongue
Examples of using Thickness
Show more
Minimum recommended thickness of zinc vs thickness of steel
Thickness of tanks made with double walls
Reduction of wall thickness and additional protection
