Examples of 'thickness range' in a sentence
Meaning of "thickness range"
thickness range: This phrase refers to a spectrum or variety of different thickness levels. It is used in contexts where measurements, specifications, or descriptions of thickness need to be conveyed with a range of values
How to use "thickness range" in a sentence
Basic
Advanced
thickness range
Wall thickness range for various tube diameters.
These values should bracket your expected thickness range.
This thickness range is used in modern magnetoresistive sensors.
Thanks to them we can produce very fine tolerances in all thickness range.
Thickness range of test pieces.
List of the more common coating materials and their coating thickness range.
This thickness range is preferred for the following reasons.
The optimal flexibility and voluminousness as synthetic leather are achieved in this thickness range.
The thickness range also has an impact on the surface resistivity.
The field contains a default value determined by your choice of coating material and thickness range.
This relative thickness range enables the enclosure to retain a satisfactory elasticity.
Dry materials Material Loss of thickness range.
This thickness range is compatible with thin film deposition and etching processes.
ONLY USE BLADES within the thickness range stamped on the riving knife.
Due to this limitation, it is very difficult to produce membranes of a broad thickness range.
See also
Within this thickness range a coating which has a good resistance against hydration is obtained.
Films, sheets or boards of a wide thickness range can be produced.
When using this thickness range adequate mark formation in the dye layer is achieved.
In the present invention, a thin hose means one in such a thickness range.
They work over a wide film thickness range and possess outstanding chemical resistance and mechanical properties.
Titanium is another preferred stabilizing layer particularly in the thickness range of 15 to 40 Angstroms.
Each thickness range conforms to a set of 2 attenuators.
Recommended for cutting sections with a thickness range from 50 nm to 2 µm.
The total thickness range for each stack is shown in Table 3.
Most clarified polyolefins are used in the 30 to 50 mil thickness range.
Easily extends production thickness range capabilities, without compromising quality of sheet.
Reinforced metal box culvert of claim 15, wherein said thickness range is from 3 mm to 7 mm.
Notes, Thickness range depends on material transducer type, surface condition and temperature.
A thickness series should cover a thickness range of approximately 100 µm or more.
Good thickness range is found be about 70 nm range.
The surface treatment layers are typically in the thickness range 10 to 100 nanometers.
The thickness range for this substrate may be between 20 microns and 1mm.
Experiments have shown, that the one preferable thickness range is between 1 and 15 nm.
Note, Thickness range depends on material, transducer type, surface condition, and temperature.
A preferred stabilizing layer is silicon, preferably in the thickness range of 20 to 50 Angstroms.
A particularly advantageous thickness range for the silica layer is between 1.5 nm and 5 nm.
Thickness range from 1mm to 3mm.
We would recommend a thickness range between 15 to 25µm for parts that are to be dyed.
The advantageous thickness range shown in Fig . 6 effectively achieves stabilized conversion efficiency up to about 13 %.
STAR Thickness range depends on model, material, transducer, surface condition, and setup selected.
The upper thickness range should not exceed about 250 µm.
You'll also be interested in:
Examples of using Range
Show more
Desired range of visibility of the navigation light
They are out of range for ten hours
Time range for which recordings are available
Examples of using Thickness
Show more
Minimum recommended thickness of zinc vs thickness of steel
Thickness of tanks made with double walls
Reduction of wall thickness and additional protection
