Examples of 'thickness reduction' in a sentence
Meaning of "thickness reduction"
Thickness reduction: The process of decreasing the width or breadth of an object or material
How to use "thickness reduction" in a sentence
Basic
Advanced
thickness reduction
A stage of chemical thickness reduction of the substrate.
Thickness reduction and material saving.
No appreciable thickness reduction was detected.
Thickness reduction and savings on material.
Production of bars and full sections by drawing and thickness reduction.
Different thickness reduction methods may be used.
Weight is applied to the plates and the thickness reduction is measured.
Thickness reduction and savings on materials.
This represents a very large thickness reduction relative to standard electronic units.
It is not necessary to achieve a great precision by the mechanical thickness reduction operation.
The wall thickness reduction is achieved by a stretching technique.
A need exists for a cable that does not allow significant jacket wall thickness reduction during handling.
The thickness reduction also will contribute to a new keyboard.
This results in a dose-dependent thickness reduction.
No thickness reduction could be detected.
See also
As a result, there is a limit to thickness reduction.
Said walls thickness reduction should not affect their performance.
As the product is rolled it becomes stronger, making further thickness reduction difficult.
The thickness reduction can also take place by chemical or mechanical etching.
This leads to cost reduction and thickness reduction ( and hence weight reduction ).
The thickness reduction of the magnetic layer reduces the propagation velocity.
Rolling causes a unidirectional stretching along axis 2 resulting from the thickness reduction of blank 7.
The thickness reduction can depend on the amount of lofting during heating.
However, the aforementioned springs have a radial bulk that is counter to this thickness reduction.
Such a thickness reduction leads to a substantial saving of materials and an improved manufacturing yield.
The more rolling stands the steel wire pass, the more thickness reduction.
The thickness reduction of the drum also makes it possible to reduce the manufacturing cost.
Accordingly, the thickness reduction is limited.
Rod-drawing wire rod Production of bars and full sections by drawing and thickness reduction.
Then the precoat thickness reduction can be performed obtaining almost similar process advantages.
This heat treatment is followed by a final rolling with a 44 % thickness reduction.
Wall thickness reduction caused by corrosion ;.
A conservative line of distinction between the two classes is 25 % thickness reduction.
A second thickness reduction stage is then performed, but using chemical means.
Especially, it significantly reduces thickness in a primary-formed state, and thickness reduction is anisotropic.
Therefore, the thickness reduction plan is usually designed with a specific product in view.
FIG . 8 illustrates this mechanical thickness reduction stage.
In particular, thickness reduction has become a very common method for reducing the weight of parts.
In Table 1 % elongation was used as a measure of metal thickness reduction.
For the belt anchorage tested a thickness reduction of about 15 was possible without reduction in safety.
FIG . 8 the component obtained after the mechanical thickness reduction stage.
Then the precoat 57 thickness reduction can be performed obtaining the process advantages of the invention.
The result is hot pressed for a thickness reduction of 97 %.
The above discussed thickness reduction generally implies improved see-through characteristics of the inspection portion.
Therefore, it is possible to satisfy the sheet thickness reduction ratio within 30 %.
Additionally, jacket wall thickness reduction during normal cable use degrades cut-through resistance of the jacket.
When the thickness reduction has been completed on the first side, the situation of Fig.
Fig . 6 is a bar chart illustrating the thickness reduction achieved with different degrees of cold-stretching ;.
The thickness reduction may amount to 66 % relative to the thickness of the original metal blank.
With smooth rolls, a 77 % thickness reduction ratio can be reached.
You'll also be interested in:
Examples of using Reduction
Show more
Disaster risk reduction and disaster management
Encouraging the forests to contribute to poverty reduction
Noise reduction systems for use on vessels
Examples of using Thickness
Show more
Minimum recommended thickness of zinc vs thickness of steel
Thickness of tanks made with double walls
Reduction of wall thickness and additional protection
