Examples of 'thickness should' in a sentence
Meaning of "thickness should"
thickness should", "definition": "This phrase suggests that there is an expected or recommended level or measure of thickness for something. It indicates that the thickness of a particular object, material, or substance should meet certain criteria or standards. The context in which this phrase is used will determine the specific subject matter and the implications of the desired thickness.
How to use "thickness should" in a sentence
Basic
Advanced
thickness should
This thickness should be exclusive of any corrosion allowance.
It is not easy to generalise what the wall thickness should be.
Thickness should be uniform to support many charging cycles.
Larger surfaces with reduced wall thickness should be excluded from these considerations.
The thickness should increase with increasing diameter.
The first fact relates to how the amount of reduction in thickness should be considered.
Paving thickness should be set on both.
In order to minimize said physical effect, the thickness should be minimal.
A compromise thickness should generally be found.
To maximize energy density of the cell, the electrolyte thickness should be minimized.
Each identified thickness should then be quantitatively determined.
The ratio between element length and element thickness should be larger than 5.
Ice thickness should be correctly determined with a probe bar.
To wrap the pallets, the film thickness should be high quality.
The thickness should be adjusted to ensure a sound wave interaction.
See also
In all cases, the ribbon thickness should be as uniform as possible.
The thickness should be generally about a third to a half of the maximum width.
For the sake of stability, normally this total thickness should never be less to 5 mm.
Specimen thickness should be measured close to where tearing is expected to occur.
Uniformly to overcome defects such as leakage, coagulation and flow hanging, and the thickness should.
Minimum wall thickness should follow the table below.
For embryo implantation to be possible, endometrial thickness should be about 7 to 10 mm.
If it is too thick the thickness should be reduced by excavation of excess material.
Thus, when the underlayer is made of polytetrafluoroethylene, its radial thickness should be about 25 micrometers.
The minimal pipe thickness should comply with applicable legislation.
If your design includes pillars, their diameter or thickness should be at least 0.5mm.
Their thickness should not exceed that of the coating layer.
Did you know ice thickness should be?
Coating thickness should be measured across the film as part of the coating sequence.
At the time of ovulation, its thickness should be at least 8 mm.
Its thickness should be chosen to compromise for the mechanical strength and the dielectric loss.
In practical terms, their thickness should not exceed about 20 micrometers.
Thickness should be less than 1mm.
Also, the capillary thickness should be sufficiently thin.
The wall thickness should be 3 mm or more to prevent the pipes from breaking.
For example, for a 20 um thick film, the variation in thickness should be less than 2 um.
Measurement of film thickness should be a routine event for all coaters.
Upper limit thickness should not be considered as that of Large Production.
For visible light the thickness should be less than 800nm.
Which wall thickness should you choose for your aluminium product?
Laying a concrete slab made - its thickness should not be less than 100 millimeters.
The 3mm thickness should hit the spot for most users.
Typically the cladding thickness should be less than 20 % of the core effective radius.
Further, this thickness should optimally be attainable without requiring a final slicing procedure.
A waiting time of minimum 2 min/25 mm thickness should be conducted before measuring the preheating temperature.
Door thickness should not exceed 4 cm.
Preferably, the wall thickness should be substantially half the diameter of the tube.
The thickness should be about ¼ inch.
Preferably the average coke thickness should not exceed about 1.5 times the fin height.
The wire thickness should be at the least 2 mm.
You'll also be interested in:
Examples of using Thickness
Show more
Minimum recommended thickness of zinc vs thickness of steel
Thickness of tanks made with double walls
Reduction of wall thickness and additional protection
