Examples of 'threaded ends' in a sentence
Meaning of "threaded ends"
Threaded ends refers to the termination points of a threaded object, such as a bolt, screw, or pipe. These ends have spiral grooves called threads that allow them to be connected or fastened to other objects using a corresponding threaded component. Threaded ends are commonly found in plumbing, construction, and mechanical applications where secure fastening and joining is required
How to use "threaded ends" in a sentence
Basic
Advanced
threaded ends
Fix the plugs and threaded ends in the ceiling.
The rod is straight between the two threaded ends.
Insert the threaded ends into the two dampers found.
Screw two nuts onto the threaded ends in the.
Dry the threaded ends and reapply an adequate amount of pipe sealant.
Align the battery bracket with threaded ends of rods.
The threaded ends of the continuation bar are protected by plastic thread protectors.
Plain or threaded ends.
Place the upper telescopic pipe over the threaded ends.
Attach one of the threaded ends of recoil hose to air outlet on front of.
Braided style ice maker hoses can be connected directly to the threaded ends.
Then screw the bolt onto the threaded ends as shown on picture below.
The threaded ends of the tie rods are connected to respective steerable vehicle wheels.
Appropriately sized piercing needles with threaded ends can be connected to this style of jewelry.
More particularly, support shell 62 has identical opposed female threaded ends.
See also
However, the threaded ends are zones which are extremely critical since they are thin.
Suspend the motor module on the threaded ends 1.
The upper threaded ends of the wedge bolts 60 extend upward through the wedges.
Alternatively, the inner pipes may be joined vía threaded ends or a bellow member.
Threaded ends 80 of the piston rods 76 are received in a threaded bore 82 in the adjustable coupling.
Alternatively, the pipe sections may be provided with threaded ends that engage.
The two threaded ends 17 and 19 of the tension member 15 advantageously have threads with opposite orientations.
In the end two holes, insert the threaded ends of the two snowplow marker wands.
The unpublished patent application FR 1057020 describes an enhanced protector for threaded ends of extraction pipes.
The compression rods 38 have threaded ends for receiving nut members 40.
The section of the center point rod 22 between the two threaded ends is not threaded.
Nuts 58 are then tightened to the threaded ends of U-bolts 54 to tighten the entire assembly.
For security, adhesive is preferably used to lock both threaded ends of the grub screw 39 ′.
The stems 9 have threaded ends.
Appropriate support over the 2x2 protruding threaded ends on the bottom of the.
The board 11 is provided with holes 22 for receiving the threaded ends of the corresponding screws 18.
You'll also be interested in:
Examples of using Threaded
Show more
The clutch assembly is threaded on the crankshaft
Threaded valve neck for fitting actuator
Make certain it is threaded correctly before tightening
Examples of using Ends
Show more
Take the ends of the hair fig
Ends designed to facilitate continuous row mounting
Check that both ends are correctly plugged in
