Examples of 'throttle setting' in a sentence
Meaning of "throttle setting"
throttle setting: This phrase is used in the context of vehicles or machinery to refer to the position or adjustment of the throttle, which controls the engine's power output. It is commonly used in discussions about automotive performance, aircraft operation, or engine tuning
How to use "throttle setting" in a sentence
Basic
Advanced
throttle setting
The engine has a fixed throttle setting.
Adjust the throttle setting to suit the load.
Use your right hand to control the throttle setting.
Increase you throttle setting to hold your airspeed.
No variation in compressor and turbine efficiency with throttle setting.
Increase the throttle setting and check the adjustment.
This will allow the engine to start at a low throttle setting.
Move the throttle setting lever to the idle position.
This will allow the engine to start at a high throttle setting.
Reduce the throttle setting during en gine shut down.
The two modes are selected based upon the throttle setting.
Reduce the throttle setting during engine shut down.
Operate the blower at the lowest possible throttle setting to do the job.
Make sure the throttle setting lever is set to the idle.
No variation in turbine flow capacity or nozzle discharge coefficient with throttle setting.
See also
The throttle setting is preferably detected vÃa an analog sensor such as a potentiometer.
Do NOT adjust the throttle setting.
The throttle setting and clutch position are preferably detected vÃa analog sensors such as potentiometers.
Advantageously, this results in less frequent changes to the throttle setting.
More the throttle setting lever to the idle position and pull the starter grip.
Pull cruise control lever back toward user, and stop at the desired throttle setting.
Reduce the throttle setting during engine run-out.
Follow engine manufacturer 's instruction procedure for Governor and throttle setting.
Reduce the throttle setting during engine shut-down.
Dynamic braking requires an application of engine power equivalent to Notch 1 or 2 throttle setting.
Reduce the throttle setting during engine shut down and, if.
Note, Operate Handheld Blower at the lowest throttle setting to do the job.
Adjusting throttle setting will increase / decrease engine speed helping to seat piston rings.
The T-screw regulates the throttle setting at idle speed.
The throttle setting without the jumper indicates Throttle / Brake / Reverse.
Once the error is corrected, the throttle setting is merely returned to the nominal value.
Once zero is reached, the auto-throttle signal 216 changes to match the nominal throttle setting TN.
Always use the lowest throttle setting required to get the job done!
Reduce the throttle setting during engine run-out and, if.
S The T -- screw regulates the throttle setting at idle speed.
The correct choke / start throttle setting is obtained by moving the control as stated above.
Here is the same 50 % throttle setting but with the direction reversed.
The correct choke/start throttle setting is obtained by moving the control to the choke position. 25.
You'll also be interested in:
Examples of using Throttle
Show more
Turn the throttle grip to reduce engine
The engine has a fixed throttle setting
Move throttle control to desired running position
Examples of using Setting
Show more
I am setting the bar low so we are not disappointed
Adjust the volume setting to an audible level
Setting the running date and time
