Examples of 'throttle trigger' in a sentence
Meaning of "throttle trigger"
This phrase typically refers to a mechanism or control in machinery or vehicles that regulates the flow or power of an engine. It is associated with the acceleration or deceleration of the engine by adjusting the throttle, which controls the amount of fuel or air that enters the engine. The trigger is the device or lever that initiates the change in throttle position
How to use "throttle trigger" in a sentence
Basic
Advanced
throttle trigger
Safety locking button throttle trigger lockout.
The throttle trigger must move freely.
Chain brake activated by throttle trigger interlock.
The throttle trigger controls engine speed.
Apply less pressure to the throttle trigger.
When the throttle trigger is in neutral range.
Squeeze and hold the throttle trigger.
Keeping the throttle trigger squeezed completely and.
Then squeeze and release the throttle trigger to.
Engage the throttle trigger to operate.
Must be depressed before activating the throttle trigger.
Move the throttle trigger in or out and tighten.
Apply full throttle by fully depressing the throttle trigger.
Do not squeeze the throttle trigger when starting.
Keep throttle trigger squeezed fully through remaining steps.
See also
The tines may coast after throttle trigger is released.
Squeeze throttle trigger fully through remaining steps.
Must de depressed before the throttle trigger can be activated.
Release throttle trigger and allow engine to idle.
This feature prevents accidental squeezing of the throttle trigger.
Check that the throttle trigger operates smoothly.
Throttle trigger can not be squeezed unless the safety latch is depressed.
Hold trimmer firmly and squeeze throttle trigger to accelerate engine.
Squeeze throttle trigger gradually to increase engine revolution.
The original setting is restored when the throttle trigger is released.
Squeeze throttle trigger in full position.
The engine will idle when you release the throttle trigger.
Pull the throttle trigger to bring the chain saw.
Be sure that saw chain stops moving when throttle trigger is released.
Release throttle trigger and let the engine idle.
The cutting chain moves because the throttle trigger is partially advanced.
Pull the throttle trigger to bring the chainsaw up to full speed.
Remove the cable guide to allow the throttle trigger to swing out.
Squeeze the throttle trigger completely and pull the.
Pull starter rope sharply while squeezing throttle trigger until engine runs.
Release the throttle trigger and throttle trigger lock.
The lock button can not push while the throttle trigger is pulling.
Releasing the throttle trigger or switch off the motor.
Engine speed can not be controlled with the throttle trigger in this position.
Operate the throttle trigger and check for smooth operation.
Check that the chain stops turning when the throttle trigger is released.
Do not engage the throttle trigger during the starting process.
Be sure that the saw chain stops moving when the throttle trigger is released.
Leave the throttle trigger of your radio in the neutral position.
Make certain the saw chain stops moving when the throttle trigger is released.
Pull the throttle trigger more to accelerate the engine speed.
It continues to rotate for a short period after the throttle trigger is released flywheel effect.
The throttle trigger interlock makes the throttle trigger operable.
When performing several cuts the throttle trigger must be released in between.
Move the throttle trigger to make sure the electronic speed control functions correctly.
You'll also be interested in:
Examples of using Trigger
Show more
Stress can trigger migraines quite easily
Just hitting it with something could trigger it
And a new trigger spring in the pistol
Examples of using Throttle
Show more
Turn the throttle grip to reduce engine
The engine has a fixed throttle setting
Move throttle control to desired running position
