Examples of 'throttle trim' in a sentence
Meaning of "throttle trim"
Throttle trim: A feature in vehicles or machinery that allows the adjustment of the throttle settings for optimal performance or fuel efficiency
How to use "throttle trim" in a sentence
Basic
Advanced
throttle trim
Throttle trim on transmitter not centered.
Lower throttle and throttle trim to lowest settings.
The throttle trim controls your helicopter to ascend and descend.
This does not affect normal throttle trim operation.
Ramp up the throttle trim to keep the propellers turning.
Ensure the throttle is not reversed and the throttle trim is neutral.
Make certain the throttle trim is set correctly as well.
For optimal use fi rst check the steering and throttle trim positions.
Now use your throttle trim to achieve the lowest reliable idle.
For the RTF transmitter fully lower the throttle trim.
Lower the throttle and throttle trim to the lowest settings.
Throttle trim adjusts the steering neutral position and is used to adjust static brakes.
Lower throttle stick and throttle trim to their lowest settings.
Throttle trim is wrong Try trimming the throttle.
Move the throttle stick and throttle trim down to confirm the throttle closes.
See also
Throttle trim is not adjusted correctly Make adjustment.
The motor will arm with throttle and throttle trim at the lowest position.
Move the throttle trim up to start the motors at the low throttle position.
Throttle too high and / or throttle trim is too high.
The throttle and throttle trim should always be at the lowest setting during bind mode.
Throttle is not at idle and / or throttle trim is too high.
User did not lower throttle trim and throttle stick prior to initializing the aircraft.
Remote control does not work correctly, incorrectly adjusted throttle trim.
Throttle stick and throttle trim have not been moved completely downwards before turning on.
If a crash is imminent, activate throttle hold or quickly lower the throttle and throttle trim.
Displaced throttle trim Set trim to neutral.
If propeller does not stop completely, adjust Throttle Trim accordingly.
Throttle trim Throttle trim subsidiary adjusts ascent and descent.
Rotating the dial causes the throttle trim ( the throttle position at rest ) to be changed.
Throttle trim Please move completely downwards.
Move both throttle stick and throttle trim on the transmitter to the “ motor off ” position.
Throttle Trim Adjusts the throttle neutral point.
Leave Throttle Trigger in neutral, then adjust Throttle Trim until propeller comes to a complete stop.
Use the Throttle trim to keep the motors turning during flight at low throttle.
Throttle trim Throttle trim regulates climb and descent 9.
Put the throttle trim completely down, all other trims to neutral.
Throttle Trim is defaulted to Switch A but can be assigned to any trimmer / switch.
Put the throttle trim completely down, all other trims to neutral, throttle stick.
Lower throttle trim and / or throttle stick to their lowest settings.
Move the throttle trim down, or activate throttle cut to stop the motors after flight.
NOTICE, Throttle trim change may affect engine operation.
Center the throttle trim and make sure any sub-trims are set to 0.
You'll also be interested in:
Examples of using Trim
Show more
I gotta trim this corner right here
Cut in different directions for a uniform trim
You gotta trim their nose hair
Examples of using Throttle
Show more
Turn the throttle grip to reduce engine
The engine has a fixed throttle setting
Move throttle control to desired running position
