Examples of 'tighten down' in a sentence
Meaning of "tighten down"
Tighten down: To securely fasten or make something more firm, stable, or secure
How to use "tighten down" in a sentence
Basic
Advanced
tighten down
Do not tighten down the screws completely.
Replace the switch plate and tighten down.
Gotta tighten down the compression valve.
Use provided screws to tighten down the amplifier.
Tighten down the wheel securely with a bolt.
Steer clear of this area until we tighten down.
Tighten down top hinge to securely hold door.
Gently squeeze the trigger to tighten down the fastener.
Tighten down cover with latches.
Replace bolts below thumb nuts and tighten down.
Do not tighten down diametrically opposed bolts in sequence.
Replace the battery compartment cover and tighten down the screw.
Tighten down the mounting screws on both hinges.
Ratchet mechanism makes it easy to tighten down strap and maintains tension on strap.
Tighten down throttle bracket making sure not to overtighten.
See also
Place the filter nut onto the threaded stud and tighten down.
Tighten down the clamp screws to the transom by hand only.
Adjust side view mirror sockets into fixed place and tighten down.
Tighten down the filler plug after changing its seal.
Align the frame square with the wall and tighten down the screws.
Tighten down the drain clamp snugly so it will not move on drainpipe.
Sturdy ratchet lets you quickly tighten down the strap for maximum cargo control.
Tighten down the already partially tightened screws fixing the box to the motor body.
As you tighten up here, you will tighten down there too.
N Tighten down the screws until the.
Rotate the switch plate to the desired position, replace the screws and tighten down.
N Tighten down the mowing head firmly.
This arterial has a lot of smooth muscle, and this smooth muscle, it can tighten down.
N Tighten down the star knob so that.
While holding the refrigerator door upright, tighten down the top hinge with a hex head driver.
N Tighten down the screw on the carrying ring firmly.
N While still holding the bar nose up, tighten down the nuts firmly.
N Tighten down the screws firmly lock the nuts if necessary.
N While still holding the bar nose up, tighten down the nut firmly.
N Tighten down the screws and nut firmly in a crosswise pattern.
Remove dipstick, wipe with clean cloth, insert and tighten down again.
Now you may tighten down all the bolts holding the Corner Back assembly.
As you tighten up here, you will tighten down there too. Here goes.
N Tighten down the screw in the control handle 6.
N Fit the other two retainers ( 4 ) on the gearbox and tighten down the screws only moderately.
N Tighten down the clamp screws first, then the hex head screw.
N Swing the cap forwards onto the shroud, insert and tighten down the screw ( 4 ) firmly.
N Tighten down the spark plug, fit the boot and press it down firmly.
As you tighten up here, you will tighten down there too. Am I hurting you?
Tighten down now, tighten down.
After correctly defi ning the limit stop 's position, tighten down screw K.
And then tighten down using the supplied M8 nuts.
Insert screw ( G ) and tighten down firmly.
After fueling, tighten down the screw-type fuel cap as securely as possible.
Tighten down lock nut once head is level Figure 37.
You'll also be interested in:
Examples of using Tighten
Show more
Tighten the screw through the clips
I will just tighten these up for you
Tighten properly the connection block screws
