Examples of 'tighten bolts' in a sentence
Meaning of "tighten bolts"
tighten bolts: This phrase is commonly employed in a literal sense to mean physically securing bolts by applying force to prevent them from coming loose or figuratively to signify strengthening a system or arrangement
How to use "tighten bolts" in a sentence
Basic
Advanced
tighten bolts
Tighten bolts to secure muffler to the engine.
Do not fully tighten bolts at this time.
Tighten bolts with the torque wrench.
Reposition guard if necessary and tighten bolts.
Tighten bolts with hand wrenches.
Align parallel to fork and tighten bolts.
Tighten bolts in diagonally opposite pairs.
Use the bolt mode to tighten bolts.
Firmly tighten bolts holding loading wheel to handles.
This wrench is used to tighten bolts.
Never over tighten bolts or screws.
Tighten bolts and nuts on chassis and body.
Do not completely tighten bolts until assembly is complete.
Tighten bolts until parts fit together firmly.
Install new defector and hand tighten bolts.
See also
Hand tighten bolts only until assembly is completed.
Adjust pointers to zero mark on trunnion and tighten bolts.
Tighten bolts so handle moves with some resistance.
Align with bolt holes in top of cabinet and tighten bolts.
Tighten bolts securely after determining the desired height.
Place joint bars and tighten bolts before spiking the rail.
Tighten bolts so han die moves with some resistance.
Spindle assemblies loose Tighten bolts on assembly.
Tighten bolts through bracket and frame until secure.
Mounting bolts loose Tighten bolts to specified torque.
Tighten bolts into each hole until the piano sits.
Loose head Tighten bolts on head.
Tighten bolts back into place and replace the center bolt.
Do not completely tighten bolts until step D.
Do not tighten bolts completely until after the console is assembled.
Abnormal noise Mounting bolts loose Tighten bolts.
Workers tighten bolts to clamp a band to the main cable.
Once remote locks are properly positioned, tighten bolts.
Do not tighten bolts until step 3 is complete.
Reinstall retaining plate ; tighten bolts and nuts.
Tighten bolts with hand power, do not use spanner.
If location of angle brackets is correct for installation, tighten bolts on assembly.
Tighten bolts in the rail joints in the following sequence,.
If handle seems to hang down, tighten bolts and nuts further.
Tighten bolts securely, and reinsert bolt to fasten the front panel.
Place table over bolts and slide toward back of grill, then tighten bolts securely.
The climbers tighten bolts on the wooden supports, and guide the track components into position.
Attach left cart brace to left cart legs, slide down, then tighten bolts securely.
Do not fully tighten bolts until step 6.
Spark plug Inspection, replace if necessary Muffler Clean and tighten bolts.
Tighten bolts with the specified torque Page 27.
Snug, but do not tighten bolts.
Tighten bOlTS from step 1 and then step 3.
Once the ideal position is found tighten bolts 28.
Tighten bolts against base using a 3/8 ” socket or wrench not included.
You'll also be interested in:
Examples of using Bolts
Show more
Heads of bolts go on the inside of the cart
Fasten with the previously removed bolts
Push bolts into holes on back of handle
Examples of using Tighten
Show more
Tighten the screw through the clips
I will just tighten these up for you
Tighten properly the connection block screws
