Examples of 'tightening the screw' in a sentence
Meaning of "tightening the screw"
The phrase 'tightening the screw' is a figurative expression that means increasing pressure or control over a person or situation. It can refer to the act of intensifying demands, restrictions, or disciplinary measures as a means of exerting authority or ensuring compliance
How to use "tightening the screw" in a sentence
Basic
Advanced
tightening the screw
Secure the guard by tightening the screw.
Finish by tightening the screw at the bottom of the panel.
Attach the magnet attachment by tightening the screw.
Tightening the screw will disengage the centering spring.
A secure attachment is then achieved by tightening the screw.
Tightening the screw clockwise will raise the height.
Secure the side handle by tightening the screw knob.
Loosely tightening the screw for securing the unit.
The orientation of the head is fixed by tightening the screw.
Tightening the screw also tightens the abutment against the implant.
Ensure that nut stays in position while tightening the screw.
Close the bottle by tightening the screw cap well on top of the adaptor.
Secure the side handle in the desired position by tightening the screw knob.
After tightening the screw connections, they are to be.
Reattach the knob to the valve stem by tightening the screw in a clockwise direction.
See also
The force exerted may be adjusted accurately by using a torque screwdriver for tightening the screw 49.
You would waste more valuable time tightening the screw than the scissors are worth.
Make sure the cover is fitted securely and properly before tightening the screw.
Secure the thermostat by tightening the screw that has been removed at step 2.
This arrangement enables a disc to be compressed when tightening the screw in the yoke.
At this point, by tightening the screw 6 the slabs are blocked to the support surface.
In this case an angled screwdriver has to be used for tightening the screw connection.
Contrarily, by tightening the screw bolt, the fracture may be compressed.
Other regions of the world show authoritarian governments tightening the screw on free media.
Before tightening the screw 17, press the base plate to the rear until it latches.
The valve is clamped and secured in a given position by tightening the screw thread connection.
Replacing the cover ( 2 ) and tightening the screw ( 1 ) secures the height adjustment fixing.
Then fit the tensioning catch into the new bar by tightening the screw clockwise.
The setting of the enlargement is obtained by tightening the screw 28 at a chosen position.
Sult is achieved, increase the collar setting and continue tightening the screw.
Lock the shaft by tightening the screw 3.
The instrument can be made airtight by gently tightening the screw 2.
It is then tightly fixed by tightening the screw 49.
Insert the battery holder, then fix it by tightening the screw.
Close the two battery compartments ( 16 ) again by tightening the screw caps in a clockwise direction.
After adjusting the length, secure the arm position temporarily by tightening the screw on top.
Then secure both parts in place by tightening the screw Fig 2, point 5.
Fit the clamp plate to the shaft by tightening the screw 24.
Fix the appliance laterally by tightening the screw V.
Now, with presidential elections imminent, Mugabe is again tightening the screw of force and terror.
Then attach the cover ( B ) to the tool by tightening the screw.
Then attach the cover ( B ) to the machine by tightening the screw.
Sparay adjustemennt Reduce the paint flow by tightening the screw H - 1.
Attach the mounting frame 12 by tightening the screw clamps 14.
Furthermore, it is possible to measure a torque during tightening the screw nut 301.
Complete clamping of the fixing device is achieved by tightening the screw 110 into the bore 46.
You'll also be interested in:
Examples of using Tightening
Show more
Tightening a screw with the impact driver at an
Replace packing if tightening does not stop leakage
Tightening when force and speed are desired
Examples of using Screw
Show more
Tighten the screw through the clips
Screw the two sections of pole together
Remove the screw on the rear coupler
