Examples of 'torque can' in a sentence
Meaning of "torque can"
Torque can refers to the ability or capacity of a machine or mechanical system to produce torque, which is a rotational force around an axis. It highlights the potential or capability of a system to generate rotational power
How to use "torque can" in a sentence
Basic
Advanced
torque can
The torque can be adjusted in this position.
Localized contact can be removed and a starting torque can be decreased.
High reaction torque can briefly occur.
Torque can be measured using a dynamometer.
A predetermined tightening torque can be provided by using a torque wrench.
Torque can be converted to linear force when the pinion turns.
A predetermined tightening torque can be ensured by using a torque wrench.
This torque can then be utilized in positioning or speed control systems.
Only motors with high torque can drive efficient propellers.
This torque can act in the clockwise direction or anticlockwise direction.
A manual torque wrench set to an appropriate torque can be used as well.
Friction torque can also be an asset in engineering.
It will be appreciated that other methods of measuring the torque can be utilized.
This torque can aid in controlling a motion.
Within this angular range the resulting torque can be zero or very low.
See also
This torque can be cancelled by a releasing pulse.
The system for measuring the transmitted torque can comprise a stress limiter.
The torque can be marked now as described below.
The speed reference and the positive feedback of torque can be continuous or discrete.
The necessary torque can be approximated by calculation.
Most skateparks do not allow pit bikes because the torque can tear up the wood.
Higher torque can not be obtained.
The steering wheel vibrations and corrective steering torque can generate a lateral motion of the vehicle.
Friction torque can be disruptive in engineering.
The benefit thereof is that the amount of magnets per Torque can be reduced.
High torque can be obtained only at low speed.
Therefore, another value of torque can be set.
The motor torque can be made large enough.
Thereby, an accuracy of detecting the torque can be promoted.
The fastening torque can be adjusted only when the.
By attaching two reluctor rings to a shaft, the torque can be measured.
The motor torque can cause the tool to turn.
Thus, increase in the resistance torque can be suppressed.
Counter torque can lead to risk in case of careless use.
In the other case, an insufficient torque can impede the manoeuvres.
Motor torque can remain constant regardless to speed changes.
However, in a magnetic particle clutch torque can be controlled very accurately.
Excessive torque can break nut depending on installation conditions.
By having more points of contact, the torque can be greatly increased.
This torque can damage the strength of the handle.
By appropriately activating the brake, more or less torque can be balanced.
High torque can be achieved at high speed with these drives.
Accordingly, stable and high conversion efficiency of torque can be obtained.
A large torque can be obtained by realizing the large reduction ratio.
As a result, the fluctuation in the clutch-transmission torque can be suppressed.
The amount of the torque can preferably be adjusted by means of a motor.
By this means, the problem by the back torque can be decreased.
The fastening torque can be adjusted by pressing the button in screwdriver mode.
Accordingly, an assist torque linearly responsive to the input torque can be obtained.
The fastening torque can be affected by many factors including the following.
