Examples of 'torque capacity' in a sentence
Meaning of "torque capacity"
Torque capacity: Refers to the maximum amount of twisting force that a mechanical system can withstand before failing or breaking. This phrase is commonly used in engineering, especially when designing and testing machinery or vehicles
How to use "torque capacity" in a sentence
Basic
Advanced
torque capacity
Friction coefficient close to transmission torque capacity.
Generic torque capacity and generic torque ratio.
All of this for uncompromised torque capacity and strength.
Low torque capacity at startup and running speeds.
Tooth modifications can have a considerable effect on torque capacity.
Generic torque capacity.
It was determined that excessive heat buildup was caused by inadequate clutch torque capacity.
Increased torque capacity.
Thus the torque transmission element may have a greater torque capacity.
The torque capacity.
Such an arrangement allows an increase in the torque capacity of the damper.
With this combination, a high torque capacity is provided at a relatively low speed for jogging.
The model requires the following definitions for the calculation of the generic torque capacity.
Particular design concern is to obtain desired torque capacity between these two structures.
This eliminates the main harmonics of gear noise and also greatly increases torque capacity.
See also
The latter is advantageous with respect to torque capacity and gear and bearing life.
Accordingly, there is little information as to the magnitude of the on-coming torque capacity.
O Exceed rated torque capacity of the wrench.
Solar sails designed to modify the system 's solar command torque capacity.
Located in the housing 24 is a relatively low torque capacity electric motor generally shown as 66.
As a whole, the algorithm is such that the actual torque never exceeds the torque capacity.
During this gear shift, moreover, the transmission torque capacity by the transmission is reduced.
FIG . 9 shows a relationship between the operation amount of the lever and the clutch torque capacity.
That is, the torque capacity of second clutch 75 is changed by driving second clutch actuator 78.
Therefore, an overrunning clutch with a large torque capacity can be provided.
The torque capacity of such a screwdriver may be at least 30 to 35 Ncm.
Thus, an overrunning clutch with a large torque capacity can be provided.
The transmission torque capacity corresponds to the position ( a clutch stroke amount ) of the clutch 40A, 40B.
Therefore, the overrunning clutch with a large torque capacity can be provided.
The transmitted torque capacity corresponds to the position of the clutches 40A, 40B ( amount of clutch stroke ).
In short, the relation between the apply pressure and the torque capacity is learned.
Then, at 176, a theoretic positive torque capacity TPCT is read in a first matrix.
It is the " MG9 " version of the transmission, which has a higher torque capacity.
Therefore, the control device 10 lowers the transmitted torque capacity of the previous clutch Cp.
Transmission with over 30 % increased torque capacity.
Description of the four-point model for the torque capacity of the TC.
A pinion assembly 640 is provided, that maximizes the transmittable torque capacity of the gearset 30.
You'll also be interested in:
Examples of using Capacity
Show more
Capacity to implement social policies and programmes
Lack of investigative capacity in respect of executive heads
Capacity assessment as discrimination on the basis of disability
Examples of using Torque
Show more
The resulting torque introduces the rotation
Torque for terminal box cover screws
Low level inducement torque reduction scheme
