Examples of 'torx' in a sentence
Meaning of "torx"
Torx (noun): A type of screw head characterized by a six-point star-shaped pattern. This phrase is often used when referring to specific types of screws or tools
How to use "torx" in a sentence
Basic
Advanced
torx
Torx bolt can not be ordered individually.
And with the torx screwdriver.
Torx screwdriver and screws are provided.
There are three torx bolts to remove.
Torx box is maintained as standard on all models.
I did not need a torx screwdriver.
The torx key is in the oven fitting bag.
This will loosen the torx screw inside the chuck.
Torx is one such pattern that has become widespread.
Remove the two torx screws from the lamp assembly.
Torx as rotation protection.
A set of small screwdrivers with both phillips and torx heads.
Torx as well.
All our frame are delivered with full torx screw sets.
Remove the two torx screws from the top of the belt cover.
See also
The latch can be repositioned vertically by adjusting the two torx screws.
Remove the slotted Torx screws to separate the.
Torx Plus is an improved head profile.
Replace and screws with damaged Torx heads.
Torx socket for Bosch high pressure pump head.
The battery is held in place by a few Torx screws.
Adjust the door springs using a Torx screwdriver until it is balanced.
Here are the three major improvements in the creation of Torx.
Counter sunk disk head screw Torx partial thread.
Insert the Torx screwdriver as shown and adjust the plunge depth as.
Secure the handle with the slotted Torx screws.
Remove the Torx screw from the center left side of the cabinet.
Grab some work gloves and a Torx screwdriver to begin.
Remove the center hinge bracket by removing the three Torx screws.
The two Torx screws are required later for securing the mounting bracket.
Mount the cover plate and tighten the Torx screws.
Remove the three Torx screws from the center left side of the cabinet.
Secure using a screw and tightening with the Torx wrench.
Remove the two Torx screws that hold the top hinge to the cabinet.
The rail mounted launcher is held in with three Torx screws.
Remove the slotted Torx screws to separate the handle from the handle support.
Adjust the furniture door using the threaded rod Torx screwdriver.
Will test Torx screws as well.
Fasten the bracket to the computer housing using the Torx screws supplied.
DO NOT remove the torx screws from the rail assemblies.
Release the suction pipe socket by unscrewing the four combination Torx screws.
Unscrew the light using the Torx key from the car tool kit.
Fasten the brackets to the computer housing using the existing Torx screws.
Programming example for a typical Torx following the ISO standard.
Pan head concrete screw Torx.
Torx Plus drivers will not fit into standard Torx screws.
Place the cover panel over the wall support panel and secure with Torx screws provided.
Torxstem is a stud with the Torx Plus Maxx drive on both ends.
Unscrew the four combination Torx screws.
This a Torx driver.
