Examples of 'total solids content' in a sentence
Meaning of "total solids content"
total solids content : Refers to the total amount of solid substances present in a solution, typically expressed as a percentage of the total mixture
How to use "total solids content" in a sentence
Basic
Advanced
total solids content
Determination of total solids content.
Total solids content.
Roasted cheese was also analyzed for total solids content.
Percentages refer to the total solids content of the respective laundry detergent composition.
A sample of the extract was freeze dried to determine its total solids content.
The percentages are referring to the total solids content of inventive aqueous solution.
Typically, gloves with a higher thickness require higher total solids content.
Percentages refer to the total solids content of the respective detergent composition for home care.
There is over a fifty percent reduction in the total solids content of the hand wash.
The total solids content of the polyisoprene coating composition was 8 %.
The coating formulation variables include total solids content solvent base, surface tension, and rheology.
The total solids content of the coating solution is approximately 10 %.
The clarified juice had a total solids content of 8 wt %.
The total solids content of this emulsion was approximately 50 percent by weight.
The resultant composition had a total solids content of 60 percent.
See also
The total solids content was about 25 wt % total dry solids in water.
Toluene was used as solvent to provide a total solids content of about 69 %.
The total solids content of the polyisoprene / nitrile blend coating composition was 8 %.
The resulting aqueous solution had a total solids content of 40 % by weight.
Total solids content using a Mettler HR73 halogen moisture analyzer.
It also is clear that as the total solids content increases, the film properties improve.
The ingredients were mixed with water to provide 25 wt % total solids content.
The product had a total solids content of 97 percent in ethanol.
A latex film was first prepared by addition of enough water to achieve a 40 % total solids content.
The composition typically has a total solids content of about 40 to about 80 percent by weight.
The trileucine formulations also contain raffinose to provide solutions having a total solids content of 1 % ( wt / vol ).
Most preferably, the total solids content does not exceed 40 % by volume of the total composition.
The catalyst solution will normally have a total solids content of up to about 75 %.
The total solids content of the mixture was 20 %.
Dispersions can be prepared directly with a total solids content of from 45 percent to 60 percent.
Tri-leucine-containing formulations also contain raffinose to provide a solution having a total solids content of 1 %.
The coating total solids content was approximately 25 %.
The resulting polymer solution had a theoretical total solids content of about 68.0 percent.
A total solids content of 25 percent to 45 percent is preferred.
Preferably it constitutes 5 - 35 per cent by volume of the total solids content of the paint.
The total solids content of the resulting adhesive was 36 %.
The liquid phase resulting from the centrifuging operations has a total solids content of between 1 and 5 %.
The total solids content of the final preparation is 10 %.
Hexane is added as a solvent, to a total solids content of 40 %.
A total solids content of about 19 % was achieved for the slurry.
Formulation solutions were prepared at a total solids content of 1 % ( w / v ).
The total solids content of the inner coating preparation was 10 % ( by weight ).
The formulation obtained has a total solids content of 80 %.
The total solids content of the composition was 39.15 % the remainder being represented by water.
The resulting solution had a total solids content of 41.8 percent.
The total solids content of the coating was 23.8 wt % total dry solids in water.
The composition typically has a total solids content of 40 to 80 percent by weight.
Deionized water was then added to the reaction product resulting in a total solids content of 58.3 %.
Adding water to achieve a total solids content of about 20 to about 60 weight percent.
The bottom curve represents data obtained for gels having 1.5 % total solids content.
You'll also be interested in:
Examples of using Content
Show more
On the product content and environmental release
Content management interfaces for web systems
Adjusts style and content when necessary
Examples of using Total
Show more
What you did was total and utter betrayal
Total separation between product and propellant
As percentage of total number of cleared cases of arrest
Examples of using Solids
Show more
The solids feared our metamorphic abilities
A sieve separates solids from used liquids
Solids liable to become liquid during transport
