Examples of 'turn the ignition' in a sentence
Meaning of "turn the ignition"
To turn the ignition means to activate the starting mechanism in a vehicle, typically by turning a key or pressing a button. This action initiates the engine's operation, allowing the vehicle to start and be driven
How to use "turn the ignition" in a sentence
Basic
Advanced
turn the ignition
Turn the ignition key to accessory position.
Open a door and turn the ignition on.
Turn the ignition like you are turning it on.
You gotta turn the ignition.
Turn the ignition back to the on position.
Make yourself useful and turn the ignition.
Turn the ignition on to the accessory position.
You jump in your minivan and turn the ignition.
Turn the ignition key to start the vehicle.
We used to have to have someone go out and turn the ignition.
Turn the ignition on and reconnect your phone.
Place the key in the ignition and turn the ignition to the on position.
Turn the ignition key to the off position.
This means that your camera automatically starts recording when you turn the ignition key.
Turn the ignition over again.
See also
Insert the ignition key and turn the ignition switch to the ON position.
Turn the ignition key and start the engine.
The headlight and taillights will come on whenever you turn the ignition switch ON.
Just turn the ignition.
When installing, be sure to turn the ignition off.
Turn the ignition off.
Key in the ignition, turn the ignition on.
Turn the ignition from the on position to the off position.
Gas is in the tank, we just need to turn the ignition.
Turn the ignition to the off position to exit the procedure.
Go to the driver 's seat and turn the ignition key.
Remember to turn the ignition off when refueling your vehicle.
Realised she couldn't get down to turn the ignition off.
Turn the ignition on.
When installing, be sure to turn the ignition key to off position.
Now turn the ignition off and pull the keys out.
And then you're gonna turn the ignition right there.
Turn the ignition off and remove the key from the ignition.
If you were able to determine the right cables, turn the ignition off again.
You may need to turn the ignition key to the accessory position.
Elevate the headlights by turning them on, and then turn the ignition off.
Turn the ignition key off to exit programming mode and save settings.
Before working on the device, turn the ignition switch is in the off position lamps.
Turn the ignition key to the stop position and remove the key.
If leaving the tractor unattended, turn the ignition key off and remove key.
Do not turn the ignition key or start the engine while the software is updating.
If leaving the tractor unattended, also turn the ignition key off and remove the key.
Turn the ignition key clockwise and keep it in this position until the engine starts.
While the system is disarmed, turn the ignition on then press and hold down push-button.
Turn the ignition off and start the engine to verify the indicator has been reset.
You can not be that dumb . Turn the ignition.
Turn the ignition key of your car to ACC.
After installation of this unit, turn the ignition switch to ON.
Turn the ignition switch to the unlocked OFF position.
During the update, do not turn the ignition to the OFF position.
You'll also be interested in:
Examples of using Turn
Show more
Persuade him to turn over a new leaf
Now turn around and meet him
The unit does not turn on when installed
Examples of using Ignition
Show more
Vi potential ignition sources including electrical equipment
Do not expose the fluid to an ignition source
Do not touch ignition key while running
