Examples of 'turn the input' in a sentence
Meaning of "turn the input"
To turn the input means to process or manipulate the given information or data. It refers to the action of transforming or converting the input in a certain way to obtain a desired output. This phrase is commonly used in the context of computer programming or mathematical operations
How to use "turn the input" in a sentence
Basic
Advanced
turn the input
Turn the input sensitivity level control up.
The mixer LO is in turn the input signal.
Turn the input selector knob.
Supply voltage to the device turn the input protection on the distribution board to ‘ on.
Turn the input sensitivity level down slightly.
If it has a distribution board, turn the input and output protections to ‘ on.
Turn the input knob to confirm and accept a flashing value.
If the switchgear panel is available turn the input and output switches « on ».
Turn the input sensitivity level control up until signal indicator is illuminated.
Turn the input knob as far as the next empty switching command.
Turn the input knob until the next empty switching command appears.
Turn the input power off at the fuse box before working on equipment.
Turn the input button until you reach the next empty switching command.
Turn the input GAIN all the way down counter clockwise.
Turn the input knob ; the individual values are shown.
See also
Turn the input knob ; value for control unit opening in per cent.
Turn the input knob until the date is displayed day / month and year are shown alternately.
Now turn the input gain controls of the installed amplifier anti-clockwise to its minimum position.
Turn the input gain on your CXQ 1 to a minimum.
Turn the input circuit breaker switch of each UPS from switchgear panel to « on ».
Turn the input Level GAIN counter - clockwise to MIN position.
Turn the input knob ; change setpoint.
Turn the input knob, show code.
Turn the input knob ; select operating mode, or.
Turn the input knob ; the value of the parameter changes 4.
Turn the input knob until the " INFO ” subitem in the Display menu is shown 2.
Turn the input knob ; select whether to delete ( Clr ) or change ( SEt ) the switching command.
Turn the Input 1 Trim control to the “ twelve o'clock ” position.
Turn the Input button until " Frost protec . sensor " is selected.
