Examples of 'undo the screws' in a sentence
Meaning of "undo the screws"
undo the screws: To loosen or remove screws that are holding something together, often used figuratively to indicate a need to fix or adjust a situation
How to use "undo the screws" in a sentence
Basic
Advanced
undo the screws
Undo the screws at the back of the.
Top notch or runner must be facing downwards in order to undo the screws.
Undo the screws on the battery hatch and remove it.
Let the shaver run until it stops, undo the screws and open the shaver.
Undo the screws or locking tabs and the filter.
From inside the filter container, undo the screws which fix the fan centring conveyor 9.
Undo the screws fixing the terminal board and remove it.
Unplug the appliance . · Open the doors, undo the screws.
Undo the screws in the stainless steel clamps using a screwdriver.
To install batteries, first undo the screws with a Phillips screwdriver and remove the battery-compartment door.
Undo the screws at the back of the shaver and open it.
NEVER undo the screws on the base.
Undo the screws and remove the lower disc protector.
Undo the screws and remove both the covers of the openings.
Undo the screws in the back of the shaver and in the hair chamber.
See also
Undo the screws and remove the hinge brackets from the base.
Undo the screws that fasten the fan to the base of the cassette.
Undo the screws that fix the pedestal to the frame from front.
Undo the screws of the battery compartment lid and remove the lid.
Undo the screws on the rear of the remote control and open the housing.
Undo the screws for the cutting depth setting 9.
Undo the screws and open the cover see Figure 9.
Undo the screws for the belt sections 8.
Undo the screws on either side of the deck fig . 6.
Undo the screws and remove the metal clip by means of a screwdriver fig . 11.
Undo the screws and remove the housing Fig . 3.
Undo the screws of the battery compartment lid and remove the lid Fig . 50.
Undo the screws on the inside of the lid fig . 12.
Undo the screws ( 1 ) and set the backrest to the required height.
Undo the screws ( 3 and 4 ) and remove the cover support bracket.
Undo the screws ( 1 ) and remove the inspection cover C.
You'll also be interested in:
Examples of using Screws
Show more
The screws are provided in the literature pack
Fully tighten screws with hex wrench
Screws are visible on the burner control panel
Examples of using Undo
Show more
Now undo the collet chuck nut
You can not undo your past
To undo tight screw connections in manual operation
