Examples of 'unthreaded' in a sentence
Meaning of "unthreaded"
unthreaded (adjective) - describes a state of not having a screw or thread, lacking thread to engage with a nut or other threaded object
Show more definitions
- simple past tense and past participle of unthread
How to use "unthreaded" in a sentence
Basic
Advanced
unthreaded
Slide blade on to an unthreaded portion of the steel.
The collar outer surface may be unthreaded.
Place the unthreaded backing flange.
Slide mower blade on an unthreaded bolt.
Place the unthreaded backing flange on spindle with the.
Claim regarding import of unthreaded fittings.
The unthreaded portion may therefore not be fixed to the body.
The remainder of the interior of the body is unthreaded.
Install the unthreaded backing flange.
The air freshener is refillable due to being able to be unthreaded.
The other end becomes unthreaded from the table.
The outer surface of the collar may be unthreaded.
The hole can be threaded or unthreaded before the implant is screwed in.
The head end is threaded and the entry end is unthreaded.
An overly long unthreaded length prevents the nut from being tightened down correctly.
See also
The flat single part is also provided with an unthreaded hole.
A nut having an unthreaded shank may be used to locate parts relative to one another.
The first glass insulators used in large quantities had an unthreaded pinhole.
The rear region of the shaft is unthreaded and has a smooth outer peripheral surface.
A small amount of air pressure may be released when the seal head is completely unthreaded.
Now, the unthreaded part is a bit too long.
Commercial techniques for forming PET utilize both threaded and unthreaded preforms.
I unthreaded the socks to make a thick thread, and rubbed it with vaseline.
Continuation of Unthreaded.
There may be an unthreaded portion 33 at one or both ends of the threaded portion.
In an alternative implementation, the transition region my be unthreaded.
The starter block can then be unthreaded from the ingot for re-use.
Optionally or alternatively, the passages are unthreaded.
Place the unthreaded backing flange on spindle with the raised section ( pilot ) facing.
Optionally, the screw holes may be threaded or unthreaded.
In use, the intermediate portion fits into an unthreaded bolt hole of the connecting rod.
Two unthreaded apertures in lead screw 33 receive the guide bars with a close sliding fit.
Also preferably, the bolt head has an unthreaded central aperture.
Unthreaded pilferproof capsules These fit on all bottles with standard turning caps cfr . Martini.
Thus, the tool can not be threaded against the shoulder provided by the unthreaded portion thereof.
Apertures 60 are typically unthreaded and support the bottom the individual fuel rods R.
However, at the provisional stage, the EC authorities decided to exclude unthreaded fittings.
Every unthreaded accessory must have a 22 mm arbor hole.
So, the threaded part works like a thread whereas the unthreaded part works simultaneously like a spring.
Unthreaded portions of guide members 52 extend through apertures included in translation member 60.
The threads are typically separated by an unthreaded shank section 36.
A corresponding unthreaded in - dined zone 14 is provided in the box.
The spacer nut 38 may alternatively be a threaded or unthreaded sleeve or tube.
A corresponding unthreaded inclined zone 14 is provided in the box.
Other embodiments contemplate that bore 328 can be smooth and unthreaded.
Line up 3 small, unthreaded holes in plate with corresponding holes in cap.
The implant replica may comprise e.g. an unthreaded generally cylindrical body.
An unthreaded portion 38 of the drive shaft extends through the pinion 22.
The hole 9 is continued by an unthreaded hole running through the inserting sleeve 13.
Abrasive wheel points ( grinding stones ) permanently mounted on plain, unthreaded mandrel shanks.
