Examples of 'upper blade' in a sentence
Meaning of "upper blade"
upper blade - The phrase 'upper blade' typically refers to the top part of a blade or cutting instrument. It is often used in the context of tools, such as knives or scissors, to describe the portion that is positioned or applied above or in contact with the object being cut
How to use "upper blade" in a sentence
Basic
Advanced
upper blade
Press up on the upper blade while tightening it.
Upper blade a is blunt or incorrectly inserted.
Securely tighten the upper blade clamp screw.
The upper blade guide is spring loaded.
Repeat this procedure at the upper blade support.
Bringing the upper blade into a rest position.
Use the upper protector of the upper blade correctly.
Use the upper blade protective cover correctly.
Locate depth of cut scale on back of upper blade guard.
Raise upper blade guide fully.
It fits over the exhaust port on the upper blade guard.
Screw the upper blade on the load cell.
Loosen lock knob and raise or lower upper blade guide.
Move the upper blade guide assembly up to its highest.
Always transport the machine with the upper blade guard fi tted.
See also
Insert the upper blade onto the keyed spindle.
Slowly feed the workpiece underneath the front of the upper blade.
Adjust the height of the upper blade guard as necessary.
Keep the upper blade guard as close to the workpiece as possible.
Align the hole in the upper blade holder with the.
The upper blade is made of extra hard steel and corrosion resistant.
Be sure to securely tighten the upper blade bolt before continuing work.
Various upper blade steps are then added to compensate the loss of heat transfer.
Orient adaptor to fit into the dust chute opening on upper blade guard.
Remove the upper blade bolt with the wrench.
Never use the machine without having the upper blade guard in place.
To exchange the upper blade a when it has become blunt.
A cam secured to the main shaft drives the pivoting sequence of the upper blade.
The height of the upper blade guide needs to be adjusted.
The adaptor fits over the dust chute which is located on the upper blade guard.
Set the upper blade guide to its lowest position.
Some tools have one washer between the upper blade and the blade holder.
Return the upper blade guard to its service position and.
Always transport your saw in saw bench mode with the upper blade guard fitted.
Please check the upper blade guard on your circular saw.
The depth of cut is the distance between the table and the upper blade guide.
Before adjusting the upper blade guide and saw table tilt.
Workpiece together with the fence assembly until the workpiece comes underneath the upper blade guard.
It retracts over the upper blade guard as the saw is lowered into the workpiece.
Use a STIHL flat crosscut file to sharpen each cutting edge on the upper blade.
Overlap the oval hole in the upper blade with that in the lower one.
Set upper blade guide 3 mm above the work piece.
Slowly feed the workpiece underneath the upper blade guard, keeping.
Insert the upper blade bolt and tighten securely with the wrench provided.
With solid foodstuffs, the optimum level is slightly above the upper blade.
Insert a new upper blade a and lightly tighten the screw on the blade holder.
For more depth of cut accuracy, a scale is located on the upper blade guard.
Install the upper blade and tighten the upper blade securing bolt with the hex wrench.
When performing this adjustment, the upper blade should be in the lowered position.
Place the upper blade i in the work position and close the front flap 0.
