Examples of 'using a screw' in a sentence
Meaning of "using a screw"
using a screw - This phrase refers to the action of using a screw as a tool to fasten materials together or to make repairs
How to use "using a screw" in a sentence
Basic
Advanced
using a screw
A compaction step using a screw extruder or a compactor.
The wire is fixed to a vertebra by using a screw.
Secure using a screw through the centre slot.
Secure the wing in the fuselage using a screw.
The idea of using a screw to measure like that.
Open the battery compartment using a screw driver.
Using a screw other than the one supplied may not provide sufficient support.
Replace the three screws using a screw driver.
Secure using a screw and tightening with the Torx wrench.
An antenna installation device using a screw type coupling device.
The restraining mechanism is removably secured to the dispensing gun using a screw.
I am not using a screw.
Install the propeller on the motor shaft using a screw.
Such compaction can be achieved by using a screw conveyor located in a passage.
The pelletised blend was introduced into a pilot scale rotary furnace using a screw feeder.
See also
Install the motor in the firewall using a screw in the top of the firewall.
To Bind using a screw and post inserted through a hole in a pile of loose sheets.
Attach the cooker hood to the hanger using a screw.
The diameter is adjusted using a screw thread that lengthens and shortens using a motor.
Of the parent unit in a counter clockwise direction using a screw driver.
The solids exit the reactor using a screw conveyor that squeezes out liquid from solids.
Remove the lens between screw and glass using a screw driver.
Using a screw driver, remove the cover of the.
A carriage can be moved along a rack using a screw engaging therewith.
Using a screw driver unwind the left-threaded securing screw.
The endoscope is secured to the cannula using a screw or other attachment mechanism.
The prestressing of the spring can be adjusted conventionally by using a screw 27.
Extruding the mixture using a screw extruder ;.
Using a screw driver, remove the screws on the bottom of the appliance.
The solids may be fed into the device using a screw feeder.
Using a screw driver, remove the screen from the water inlet.
Attachment of the seal is accomplished by clamping using a screw and a clamping plate.
If one element is moved using a screw micrometer, precise angle measurements can be made.
After addition of the solution and mixing the mass is extruded using a screw extruder.
The tube was sealed using a screw cap with a gas-tight fitting.
The dry calcium acetate is transported to the pyrolyzer lock hopper using a screw conveyor.
Using a screw driver, pierce the perforated hole and pass the wire through it.
A horsehair ribbon is stretched between the head and the frog using a screw and nut system.
Moreover, in a means using a screw cramp, the labor or the cost required for fastening increases.
Align and attach the wing to the fuselage using a screw C.
The latter is held using a screw 51 fastened to the body.
Cover the nose gear hole with the nose plate using a screw A.
Hanging on a wall using a screw - figure C.
Typically, the pivot connection is formed using a screw.
I think you might be using a screw as a nail . - No.
In another embodiment the asparagine-reducing enzyme is added using a screw mixer.
Melt plasticisation was carried out using a screw speed of 297 rpm and a back pressure of 50 MPa.
Therefore, we decided to connect them using a screw.
These test-pieces were prepared using a screw press of trademark DK, type 60.
The adjustable supports can be constructed in various ways, for example using a screw adjustment.
You'll also be interested in:
Examples of using Screw
Show more
Tighten the screw through the clips
Screw the two sections of pole together
Remove the screw on the rear coupler
Examples of using Using
Show more
Mash kidney beans using a potato masher
Log in using the default administrative account
Proportion of households using a clean water source
