Examples of 'valve is open' in a sentence
Meaning of "valve is open"
This phrase is typically used in technical or mechanical contexts to describe the state of a valve in a system or apparatus. It means that the valve is not closed or obstructed, allowing the flow of fluid or gas through the designated passage or channel
How to use "valve is open" in a sentence
Basic
Advanced
valve is open
Only one valve is open at any time.
Only the permeate discharge valve is open.
The analysis valve is open continuously in analysis mode.
Check that the fuel valve is open.
The valve is open but no air flow from it.
Make sure water inlet valve is open.
The valve is open when the cover is in closed position.
Check if the water supply valve is open.
In case this valve is open the remaining time will be indicated.
Make sure main supply valve is open.
The flush valve is open and the inlet valve is closed.
Close drain valveTank drain valve is open.
Flood valve is open.
Check that the hydrostatic valve is open.
The valve is open.
See also
Make sure that the valve is open.
Vent valve is open.
Check that the water supply valve is open.
That valve is open.
Upper stem position indicates if valve is open or closed.
When this valve is open it establishes communication with a hydraulic tank.
The tank drain valve is open.
The control valve is open only if the priority circuits are satisfied.
Ensure the water supply valve is open completely.
This type of valve is open when water is being discharged through the valve.
Ensure the fuel valve is open.
The throttle valve is open at low speed and closed at high speed.
The fuel cutoff valve is open.
In particular the channel is closed by a recirculation valve if the application valve is open.
The air release valve is open.
Whether a valve is open or closed can also be determined for each process stage.
The corresponding selection valve is open.
From escaping if the check valve is open and no filter cartridge is installed.
Lighting the pilot when the gas valve is open.
Make sure that the valve is open for zero check.
Check to make sure the gas shuto valve is open.
Transfer valve is open.
When the regulator is not pressurized this valve is open.
Charging valve is open.
Keep the hand tool moving when the valve is open.
Ensure that the upstream valve is open when the chiller starts operation.
Make sure the fuel shut off valve is open.
The time each valve is open serves to control the quantity of liquid dispensed.
The appliance does not warm up when the drain valve is open.
The valve is open and the continuity of the injected fluid circuit is assured.
The signal light blinks to indicate that the valve is open.
The tank valve is open when the handle lines up with the tubing connection.
Ensure that the discharge pipe of the safety valve is open to atmosphere.
Make sure fuel shut off valve is open and throttle is in the rabbit position.
This allows the pipeline to drain completely when the valve is open.
