Examples of 'valve lever' in a sentence
Meaning of "valve lever"
a handle or lever used to control or manipulate a valve; typically found in mechanical systems or plumbing fixtures
How to use "valve lever" in a sentence
Basic
Advanced
valve lever
Turn the fuel valve lever on see page.
Unregulated air quarter turn ball valve lever.
The valve lever can be set in two positions.
Turn on the fuel valve lever.
Keep the valve lever on the control lever closed.
Speed was controlled by means of a throttle valve lever.
Do not force the silver valve lever or release lever.
The valve lever is then flipped to the inject setting.
Injector starting valve lever.
The valve lever must not be locked while operating the machine.
Sprinkling valve lever.
The maximum pressure is limited by a weight placed on the safety valve lever.
Turn off the fuel valve lever and loosen the drain screw.
The valve of the activating pin is activated by the eccentric valve lever.
Set the fuel valve lever on the fuel valve and tighten the screw.
See also
This results in a large opening área created by a small movement of the eccentric valve lever.
Preferably the air valve lever is interconnected with the spring actuated lever by a rod.
Open the safety valve while the kettle is pressurized by lifting the safety valve lever.
Release any stored pressure by moving the valve lever forward and backward several times.
Turn fuel valve lever to ON and then loosen the carburetor drain screw.
Check oil level and fuel supply then open fuel valve lever P.
Move remote cylinder control valve lever back and forth to relieve stored hydraulic pressure.
Loosen the carburetor drain bolt, then turn the fuel valve lever to the ON position.
Turn the fuel valve lever to the ON position.
T-bore s topcocks with nozzles PTFE, valve lever PP.
Turn the fuel valve lever to the OFF position.
Install the left side cover and fuel valve lever see page 38.
Move the fuel valve lever to the OPEN position.
Check . Sprinkling valve lever.
Place the fuel valve lever on gas tank in the CLOSED position.
After stopping the engine, turn the fuel valve lever to the OFF position.
Turn the fuel valve lever to the ON position and check for leaks.
Stop the engine, and move the fuel valve lever to the OFF position.
The fuel valve lever must be in the ON position for the engine to run.
Fuel valve closed Move the fuel valve lever to the " Open " position.
Turn the fuel valve lever to the OFF position when transporting the generator.
Check that the solution valve lever ( 6 ) is open.
Set fuel valve lever to the OFF position.
During insertion, an internal valve ( not shown ) connected to valve lever 18 is opened.
The fuel valve lever should be turned OFF.
Using the appropriate selective control valve lever in the tractor cab, start the chain conveyor.
Press valve lever down for about 20 seconds until water freely runs out of the spout.
To check, Turn off the fuel valve lever and loosen the drain screw.
Fuel valve lever ( if equipped ) in OFF position.
Place the fuel valve lever ( O ) in the ON postion.
The valve lever can also be designed as the valve lever 226 shown in Figure 3A.
In this case, first the discharge valve lever 16 is operated to close the discharge valve 15.
A directional valve lever 373 is rotated as needed to communicably align two of the respective ports.
For this, the valve lever must be repositioned.
Move Fuel Valve lever to the right to operate the tiller.
You'll also be interested in:
Examples of using Lever
Show more
Do not lift lever during brewing cycles
Lever can be adjusted to a different lever angle by
Open the lock lever to unlock footplate
Examples of using Valve
Show more
Lift the valve assembly up and out
Grasp black lever on one drain valve
Check valve assembly caps to ensure tightness
