Examples of 'valve shaft' in a sentence
Meaning of "valve shaft"
valve shaft: Refers to the rod or spindle in a valve that controls the flow of fluids or gases by opening or closing passages within the valve
How to use "valve shaft" in a sentence
Basic
Advanced
valve shaft
Do not force knobs onto valve shaft.
A coupling between valve shaft and actuator for control use.
This can damage the gas valve shaft.
The piston and the valve shaft are linked by a link rod and a crank.
Insert a screwdriver through the accesshole in valve shaft as shown.
The safety valve shaft lies on the same plane as the actuating shaft.
Remove the knob and insert a screwdriver into the valve shaft.
The valve shaft is eccentrically fixed to the disc and located at one side thereof.
Check that the control knob is pressed completely down on the valve shaft.
Throttle valve shaft ready for chemical Blacking.
The follower is the driven element which transmits the movement to the valve shaft.
Removal of a valve shaft part área from the residual valve disc part área, and.
Stuck float valve Clean float valve shaft.
A double effect distribution sequential valve shaft 2 is mounted inside the jacket 1 with a very accurate tolerance.
Pump does not function Stuck float valve Clean float valve shaft.
See also
A smooth rotation of the valve shaft 3 is ensured by a shaft bearing 6.
Also, the valve housing may comprise a bearing for the valve shaft.
The valve shaft 3 extends through a shaft bore formed in the main body 1.
As in the preceding procedure, remove the knob and insert a screwdriver into the valve shaft.
Thus, in the manufacture of the valve assembly 8, the valve shaft 9 has a positional tolerance.
The valve shaft is attached to an actuator ( 58 ) for control of movement.
Bearings 6 are used for supporting the valve shaft 3.
Furthermore, the valve shaft 29 is fixedly connected to the inner magnet ring 8.
Figure 12 is the perspective view of the check valve shaft.
Each valve disk is connected to a valve shaft 54, 55 having common symmetry axis.
Insert a small, flat-blade screwdriver into the valve shaft.
The valve shaft 14 is eccentrically positioned with respect to the valve plate member 13.
The valve member 2 is rotatably supported in the main body 1 by means of a valve shaft 3.
The valve shaft 42a is driven to rotate by the valve shaft driving gear 43e.
The electric motor 20 is positioned with its rotating shaft parallel to the valve shaft 12.
The valve shaft 42a is rotated and driven by the valve shaft driving gear 43e.
Adjustment screw next to the valve shaft Fig . 3.
The spring 30b urges the valve shaft 12 in the closing direction vÃa the transmission member 47.
The throttle position sensor 52 is connected to the valve shaft 65.
Thus, the controlling means 70 controls the valve shaft opening degree of the valve shaft 21.
Also, a throttle opening sensor 50 is provided on a left end of the valve shaft 48.
The relatively small cylinder 22 and the valve shaft guide 26 have some radial play.
The holding ring 36 serves to keep the valve member on the valve shaft 20.
A throttle actuator 49 is provided on a right end of a valve shaft 48 of the throttle valves 46.
Each of the link mechanisms 83 is suspended between the planetary gear 82 and the valve shaft 78.
A drive cable ( not shown ) is connected to the valve shaft 67a.
The rear throttle valve 58a is connected with the rear throttle valve 58b by a valve shaft 66.
The spring 31 is wound around the rotating shaft of the valve shaft driving gear 43e.
The front throttle valve 57a is connected with the front throttle valve 57b by a valve shaft 65.
The second link mechanism 80 is suspended between the throttle position sensor 79 and the valve shaft 78.
You'll also be interested in:
Examples of using Shaft
Show more
This is the shaft of the pry bar
Shaft seal depends on water for lubrication
Blind hollow shaft or hollow through shaft
Examples of using Valve
Show more
Lift the valve assembly up and out
Grasp black lever on one drain valve
Check valve assembly caps to ensure tightness
