Examples of 'vickers hardness' in a sentence
Meaning of "vickers hardness"
vickers hardness - Vickers hardness is a method used to measure the hardness of a material
Show more definitions
- The hardness of a material according to the Vickers hardness test, based on its ability to resist plastic deformation from a standard source.
How to use "vickers hardness" in a sentence
Basic
Advanced
vickers hardness
Vickers hardness test for steel.
Digital micro vickers hardness tester.
Vickers hardness testing facilities are also available.
The macro and microstructural characteristics were evaluated by optical microscopy and vickers hardness.
Vickers hardness of bainite has an influence on tensile strength.
The weldments mechanical properties were analyzed through tensile and vickers hardness tests.
Vickers hardness test was performed to analyse the mechanical behavior of the material.
The hardness and microhardness before and after the tests were measured using a vickers hardness tester.
The measurement of the Vickers hardness was then performed.
The Vickers hardness was measured on cross section of the coatings.
The pyramidal diamond indenter of a Vickers hardness tester.
The reduced Vickers hardness allows easier finishing and polishing.
Samples were analysed by using the Vickers Hardness test.
The density and the Vickers hardness of the sintered pieces were measured.
The student t test showed a significant difference in torsion test, toughness and vickers hardness p.
See also
The measurement of the Vickers hardness test was then carried out.
A Vickers hardness tester measures Vickers hardness of surfaces and materials by indentation.
Harder milling media materials have higher Vickers hardness numbers than softer milling media materials.
A Vickers hardness tester.
Mohs scale of mineral hardness Vickers hardness test Brinell scale.
Vickers hardness - tensile strength conversion.
Hv orig is the original Vickers Hardness measured in the control composition.
Vickers hardness test for steel - second edition.
Test B aims to determine the Vickers hardness by microindentation.
Vickers hardness on enteric coating layered pellets is measured to a value of 2.
Fig . 7 is a graph showing a relationship of Vickers hardness with a ratio of a shear plane.
In addition, Vickers hardness is measured using a micro-Vickers measuring device.
The sample from example 1 was then subjected to a measurement of the Vickers hardness.
A significant decrease in Vickers hardness values appeared in the fourth recast in both alloys.
In still other embodiments, the abrasive tool may have a specific Vickers hardness.
The Brinell and Vickers hardness tests and the tensile test.
The values of the above 10 points were arithmetically averaged to obtain the Vickers hardness.
The Brinell or Vickers hardness is normally determined.
Besides pressure testing, shotshells containing steel pellets require an additional Vickers hardness test.
Table 3 shows Vickers hardness values of these sintered bodies.
As the surface hardness, Rockwell hardness and Vickers hardness were measured.
Vickers hardness of a selected área was measured using Microhardness tester MXT-a1.
Hardness was determined with a Vickers hardness tester using a pyramidal indenter and a 30 kg load.
Vickers hardness measurements were carried out on nails treated with the composition Example 2 above.
Fig . 7 shows a relationship of Vickers hardness of each test piece with a ratio of a shear plane.
Vickers Hardness values for exemplary glasses are shown in Table 1.
CO-treatment increased the alloys' Vickers hardness notably and seemed to improve the wear resistance.
EPMATHMARKEREP HVWM in Expression ( a ) indicates average hardness of the weld metal in Vickers hardness.
The Vickers Hardness of a material is a measure of the material 's resistance to plastic deformation.
Figure 2 shows a schematic diagram of typical force vs. displacement curve for a Vickers Hardness Test.
The Vickers hardness on enteric coating layered pellets prepared is measured to a value of 2.
The materials were characterized by chemical analysis ( optical emission spectrometry ), vickers hardness and mi.
The Vickers hardness of the two sides after annealing is also given in table 1.
The mechanical behavior of sae 1010 steel was conducted from vickers hardness measurements.
In an ordinary Vickers hardness test, a formed indentation becomes larger than the martensite.
You'll also be interested in:
Examples of using Hardness
Show more
Water hardness limitations for steam mode
Understanding of water hardness and other values
The hardness of his gaze makes me doubt it
Examples of using Vickers
Show more
Vickers is also survived by a son and a grandchild
About selby vickers and his wife
Vickers was involved in the production of numerous firearms
