Examples of 'viscosity measurements' in a sentence
Meaning of "viscosity measurements"
Viscosity measurements refer to the process of quantifying the thickness or resistance to flow of a fluid, usually in the context of scientific experiments or industrial processes.
How to use "viscosity measurements" in a sentence
Basic
Advanced
viscosity measurements
Viscosity measurements with the capillary rheometer.
This may be reinforced by extensional viscosity measurements.
Viscosity measurements were measured using a capillary viscometer.
The economical solution for your viscosity measurements.
Viscosity measurements were made at various shear rates.
The results plotted below are based on viscosity measurements.
The viscosity measurements expressed in kilo.
The swelling ratio can also be measured by viscosity measurements.
The comparative viscosity measurements were as follows.
Crew to operate the unit and run basic viscosity measurements.
Viscosity measurements are taken on this part.
Use suspended level viscometers for viscosity measurements at low temperatures.
Viscosity measurements were taken and recorded.
Intrinsic viscosity measurements.
Viscosity measurements were recorded over a specified time period.
See also
It was insoluble in the solvent mixture employed for the viscosity measurements.
We have done viscosity measurements of the above gel samples.
This definition is consistent with general principles of bulk viscosity measurements.
Cinematic viscosity measurements were carried out on selected oils.
The formulation is thixotropic and so equilibrium viscosity measurements were difficult to achieve.
Viscosity measurements may be useful for oil type identification.
The molecular weight often can be determined by inherent viscosity measurements.
Viscosity measurements are then performed.
The dilution procedure and the viscosity measurements are described in the examples hereinafter.
Viscosity measurements are unreliable.
Paints were stored at ambient room temperature in sealed paint cans between viscosity measurements.
The viscosity measurements were performed at multiple percentage torque values.
The purified sample used for intrinsic viscosity measurements were used for neutral sugar analysis.
The viscosity measurements were conducted under the following conditions.
The factors affecting stability were determined also with rheological viscosity measurements and turbidity measurements.
Ten viscosity measurements are carried out for each rate gradient.
Widely known as the Standard of the Industry for drilling fluid viscosity measurements.
Laray viscosity measurements show decreased viscosity for this sample.
In some embodiments, the chemical compositions of PSFs are analyzed by viscosity measurements.
The viscosity measurements are carried out using a parallel plate rheometer.
The results of the various viscosity measurements are given in Table I below.
Viscosity measurements are automatically recorded every second during the length of the catalyzed reaction.
And spindles allows optimal viscosity measurements within the wide range of the instrument.
Viscosity measurements and molecular weight distribution revealed decreased molecular weight on all steam exploded samples.
The rheological study from dynamic viscosity measurements identified the newtonian fluid behavior for all samples.
Viscosity measurements were determined using a Brookfield Viscometer.
The results of the viscosity measurements are shown in Table I.
Viscosity measurements are summarized in Table II.
After storage for two months, the following viscosity measurements were obtained,.
These viscosity measurements may be performed using plate and cone geometry.
The characterization of CMCs depends mainly on rheology measurements, in particular viscosity measurements.
Brookfield viscosity measurements were made directly on the suspension obtained following grinding.
The progress of the reaction may be monitored by viscosity measurements and / or by turbidity measurements.
Conventional viscosity measurements can be used to determine when the oil should be replaced.
A Ferranti-Shirley viscometer is used for the viscosity measurements of the polyol polyester.
You'll also be interested in:
Examples of using Measurements
Show more
All inch measurements are converted from millimeters
Do not perform capacitance measurements on live circuits
All measurements will be based on interior dimensions
Examples of using Viscosity
Show more
High viscosity materials applied without problems
Effects of polysaccharides on viscosity in the rheology of foods
Its viscosity lets an unctuous consistency reappear
