Examples of 'viscosity of the polymer' in a sentence
Meaning of "viscosity of the polymer"
viscosity of the polymer - It pertains to the thickness or resistance to flowing of a polymer material, often a key property in determining its application or behavior
How to use "viscosity of the polymer" in a sentence
Basic
Advanced
viscosity of the polymer
Another advantage is the viscosity of the polymer solutions.
Viscosity of the polymer at various temperatures during the process has to be considered.
One of these is the intrinsic viscosity of the polymer.
The intrinsic viscosity of the polymer is an indication of its finite molecular weight.
Torque gives an indication of the viscosity of the polymer.
V is the viscosity of the polymer.
This is to be understood by not decreasing importantly the viscosity of the polymer composition.
The desired intrinsic viscosity of the polymer depends on the application.
Viscosity of the polymer can be adjusted by the adjustment of the molecular weight.
These reactive diluents reduce the viscosity of the polymer solution.
The viscosity of the polymer is again lowered causing it to flow within the web.
The effect of temperature change on the viscosity of the polymer solution is significant.
This degree of polycondensation can be determined by measuring the intrinsic viscosity of the polymer.
Increasing the viscosity of the polymer solution can also increase microparticle size.
The stability of the strands is influenced by the viscosity of the polymer solution.
See also
This is because the viscosity of the polymer melt of such a material is exceedingly high.
The pressured application of the polymer is sensitive to the viscosity of the polymer composition.
The viscosity of the polymer polyols was measured on a rotoviscometer equipped with a constant temperature cell.
The pressure drop was determined experimentally to be related with the viscosity of the polymer.
The inherent viscosity of the polymer directly influences the mechanical properties of the tube.
The polymerization degree can be known from the viscosity of the polymer dope.
The viscosity of the polymer solutions is determined using a Viscotek Modified Differential Viscometer.
Extrapolation of the plot to zero concentration yields the intrinsic viscosity of the polymer.
Here, the selection of inherent viscosity of the polymer is most important.
The viscosity of the polymer solution was between 4 and 6 Pa . s.
The coating thickness generally depends on the concentration and viscosity of the polymer solution.
However, a too high viscosity of the polymer dispersion is not beneficial to the end-application.
The process works at a certain temperature which influences the viscosity of the polymer solution.
The variations in the viscosity of the polymer are equivalent to Stage 4.
The MFR is an indication of the melt viscosity of the polymer.
Alternatively, the viscosity of the polymer solutions is determined using a Viscotek Modified Differential Viscometer.
This K value is related to the intrinsic viscosity of the polymer.
The Mooney viscosity of the polymer obtained is 50.
The higher the MFR, the lower the viscosity of the polymer.
The ML viscosity of the polymer thus coupled is 66.
In this way the average dynamic ( shear ) viscosity of the polymer was determined.
The Mooney viscosity of the polymer thus functionalized is 72.
In this way the average dynamic ( shear ) viscosity of the polymer is determined.
The intrinsic viscosity of the polymer in chloroform was found to be 1.76 di / g.
When the temperature is lowered, viscosity of the polymer tends to increase.
The Mooney viscosity of the polymer thus coupled is 59.
According to a similar technique, inherent viscosity of the polymer resulted in a value of 0.27dl/g.
The inherent viscosity of the polymer that is thus obtained is 1.3 di / g.
The IV numbers represent intrinsic viscosity of the polymer in decalin at 135°C.
The inherent viscosity of the polymer was measured as described in Example 1 and was 19.3 dL / g.
Moreover, the heating keeps the viscosity of the polymer conveyed through the lines low.
The inherent viscosity of the polymer that was polymerized for seven hours was 0.62.
In such embodiments, the viscosity of the polymer may be about 85 Mooney units.
The intrinsic viscosity of the polymer can not be as high as 0.85 di / g or more.
The inherent viscosity of the polymer that was polymerized for three hours was 2.76.
You'll also be interested in:
Examples of using Polymer
Show more
Injected polymer compound shell in three sizes
We seem to be a bit light in the polymer sciences
High resistance polymer flow indicator cover
Examples of using Viscosity
Show more
High viscosity materials applied without problems
Effects of polysaccharides on viscosity in the rheology of foods
Its viscosity lets an unctuous consistency reappear
