Examples of 'thickness of the polymer' in a sentence
Meaning of "thickness of the polymer"
thickness of the polymer: Relates to the physical measurement of how thick a polymer material is
How to use "thickness of the polymer" in a sentence
Basic
Advanced
thickness of the polymer
The thickness of the polymer film is an important parameter.
The charge recorded is used to determine the thickness of the polymer formed.
A film thickness of the polymer is not specifically limited.
A variety of factors may affect the choice of thickness of the polymer layer.
The thickness of the polymer film image is on the order of a micron.
The heavy ions pass through the entire thickness of the polymer film.
A thickness of the polymer electrolyte membrane was determined at any six points.
The thickness of the hank determines the thickness of the polymer sheet obtained.
The thickness of the polymer film is sufficiently small to limit the background noise.
The synthesis charges are measured and the thickness of the polymer can thus be evaluated.
The thickness of the polymer surrounding the clay material may be relatively constant.
Each of the diameters may be perpendicular to the thickness of the polymer ply 79.
What varies is the thickness of the polymer shell surrounding each core pigment.
The undeflected thickness 22 thus corresponds to the thickness of the polymer in cross section.
The thickness of the polymer coating preferably is less than the diameter of the core.
See also
Moreover, the position of the turns in the thickness of the polymer layer is random.
An increased thickness of the polymer film 20 results in a higher dielectric breakdown voltage.
To achieve a transducer capable of higher forces, the thickness of the polymer may be increased.
The thickness of the polymer layer obtained is about 10 microns.
The average deposited amounts and thickness of the polymer layer are shown in Table 3.
The thickness of the polymer layer ( 1 ) can vary in large proportions.
In a particularly preferred embodiment, the thickness of the polymer layer is 30µm.
In embodiments, the thickness of the polymer layers is from about 2 to about 3 nanometers.
Next, as the discharge time lengthens, the thickness of the polymer increases.
The thickness of the polymer layer was about 0.8 um.
The absorption will be a measure of " absorption length ", viz . the thickness of the polymer layer.
The thickness of the polymer layer varies between 10 nm and 1 um.
The thickness of the polymer film on the catalyst grains ranges from 25 to 100 um.
You'll also be interested in:
Examples of using Polymer
Show more
Injected polymer compound shell in three sizes
We seem to be a bit light in the polymer sciences
High resistance polymer flow indicator cover
Examples of using Thickness
Show more
Minimum recommended thickness of zinc vs thickness of steel
Thickness of tanks made with double walls
Reduction of wall thickness and additional protection
