Examples of 'voltage increases' in a sentence
Meaning of "voltage increases"
voltage increases - refers to the rise in electrical potential difference in a circuit or system, often measured in volts
How to use "voltage increases" in a sentence
Basic
Advanced
voltage increases
The breakdown voltage increases with humidity.
Their resistance decreases when the voltage increases.
Higher voltage increases the distance electricity can arc.
Their capacitance decreases as the reverse bias voltage increases.
The voltage increases at constant pressure as the current decreases.
The thickness of the powder coating increases as the applied voltage increases.
The voltage increases with increasing current density at the electrodes.
Electric fields are produced by voltage that increases in strength as the voltage increases.
Onset voltage increases which are higher indicate better electrochemical stability.
The outlet pressure of the pump increases as its supply voltage increases.
When the voltage increases as we approach us the last race of the day.
Passivation appears when the current drops suddently and the voltage increases.
The voltage increases the score gained for each successful note.
Save energy and avoid short circuits by unplugging appliances to prevent accidents voltage increases.
This voltage increases until some maximum dictated by the capacitor structure.
See also
But the resistance decreases dramatically when the voltage increases beyond the rated value of varistor.
As the voltage increases the permitivity and the dielectric losses increase.
We protect your equipment and data from voltage increases and spikes with our industrial equipment.
Low voltage increases image contrast which is especially important for biological specimens.
The capacitor Ca charges and the voltage increases across its terminals.
Similar voltage increases are observed for the other cells of the stack.
Accordingly, the electrolytic voltage increases.
The bus voltage increases from low end light output to high end light output.
As the motor speeds up, this induced voltage increases.
Increasing the voltage increases the amplitude of oscillation of the QCM.
In other words, the voltage drops must equal the voltage increases.
During the Recond step voltage increases to create controlled gassing in the battery.
Above this threshold, the luminosity increases when the voltage increases.
Once the battery voltage increases, power will be restored.
As the temperature rises, the resistance decreases and the voltage increases.
For both switches, the output voltage increases with the position number.
At low temperature, the mobility is reduced and the threshold voltage increases.
In some embodiments, increasing voltage increases the capture rate.
When the voltage increases to the limit, damage may occur to the inverter.
From this time on, the arcing voltage increases more quickly.
This voltage increases rapidly, then passes through a maximum and finally decreases exponentially.
If the flow of ionic media occurs, the measured galvanic voltage increases.
As the reluctor speeds up, voltage increases from about four volts to about six volts.
As the distance from the target increases, the lower threshold voltage increases.
Eventually, the voltage increases to a level where other processes start to contribute to the current.
As the tag moves into the field of the interrogator, the induced voltage increases.
At higher band gaps, the open circuit voltage increases but fewer photons will be absorbed.
Furthermore, the recovery electric current increases as the applied reverse bias voltage increases.
Boosting the voltage increases capacity, but going beyond specification stresses the battery and compromises safety.
Because the circuit has a high Q, its voltage increases dramatically.
APP sensor 1 voltage increases as the accelerator pedal is depressed.
Direction of action 1, closes as the control voltage increases.
As the voltage increases beyond Vcr1 the brightness of the spot will increase.
Can we accommodate the voltage increases that brings? '.
This voltage increases until respective diodes D1 to Dn begin to conduct.
You'll also be interested in:
Examples of using Increases
Show more
An uneven surface increases the risk of overturning
Increases or decreases the high frequency response
The start time increases when turned
Examples of using Voltage
Show more
Voltage drop due to use of extension cable
Information on the voltage is on the rating plate
Voltage measure switch for phase voltage
