Examples of 'voltage rating' in a sentence
Meaning of "voltage rating"
voltage rating - This refers to the maximum voltage level that a device or electrical component can safely handle.
How to use "voltage rating" in a sentence
Basic
Advanced
voltage rating
The voltage rating is on the product label.
Amp code current rating voltage rating.
Does the voltage rating of the bench grinder.
Application voltage exceeds product voltage rating or installed by.
Specific voltage rating available on re uest.
Switches are off and that the voltage rating.
Do not exceed voltage rating of the selected configuration.
Ensure the power supply used has an appropriate voltage rating.
Do not exceed the voltage rating of the circuit being powered.
Damage could occur if supply voltage exceeds heater voltage rating.
Of the same voltage rating.
Check the product label of your amplifier for the voltage rating.
Breakdown voltage rating.
The setting must match your local line voltage rating.
Refer to the category and voltage rating of the test lead or accessory.
See also
The voltage rating stated on the tool should correspond to the mains voltage.
A reduction in electrical stress may increase a voltage rating of the transformer.
Check the voltage rating on your printer located under the top cover.
The operating voltage shall match the voltage rating of the motors.
Do not exceed voltage rating on the label located on the top of the instrument.
The fourth and final thing is the maximum voltage rating allowed.
Check that the motor voltage rating meets the application requirements.
Ensure that the power supply you use has an appropriate voltage rating.
Be careful to match the voltage rating of any load sources you connect.
Make sure your power source is adequate for the product voltage rating.
Assure that the circuit breaker voltage rating is appropriate for the system.
The main difference between these two types of bushings is their voltage rating.
An insulated wire or cable has a voltage rating and a maximum conductor temperature rating.
This embodiment thus requires three capacitors with full impulse voltage rating.
Ensure that the voltage rating corresponds to the power supply you intend to use.
Make sure that your power source is adequate for the printer voltage rating.
Connecting a power supply of a different voltage rating or incorrect wiring may cause a fire or failure.
There are two different types of mains fuse for different input voltage rating.
Make sure that the voltage rating on the type plate corresponds to your main voltage.
Power supply voltage must be the same as heater voltage rating shown on heater nameplate.
The appliance should be connected to a properly grounded dedicated branch circuit of proper voltage rating.
Make sure the soft starters maximum voltage rating is suitable for chosen motor voltage.
Before powering this device verify that the amplifier is supplied with the correct voltage rating.
Extra bands on ceramic capacitors identify the voltage rating class and temperature coefficient characteristics.
Check the voltage rating of the Electrobrush before connecting it to the vacuum cleaner.
Standard filament lamps are specified in only one voltage rating for each category.
The voltage rating of the SPD and system must be verified before energizing the SPD.
Check heater nameplate and verify supply does not exceed the voltage rating before energizing.
This voltage rating may lead to a critical electrical shock!
The Tempra should be connected to properly grounded dedicated branch circuits of proper voltage rating.
VOLTAGE This would be the voltage rating for which the motor is designed.
The DHC should be connected to a properly grounded dedicated branch circuit of proper voltage rating.
The standard voltage rating for this range is as follows,.
Standard LED light sources are specified in only one voltage rating for each category.
Check the voltage rating of the power-brush before connecting it to the.
You'll also be interested in:
Examples of using Rating
Show more
Rating soft average hard very hard
Low priority rating for a given element
Rating plate with supply connection data
Examples of using Voltage
Show more
Voltage drop due to use of extension cable
Information on the voltage is on the rating plate
Voltage measure switch for phase voltage
