Examples of 'voltage source' in a sentence
Meaning of "voltage source"
This phrase refers to a device or component that provides a steady and consistent electrical voltage or potential difference. It is commonly used in electrical engineering or electronics, where a voltage source is required to power or operate other circuit components or systems
How to use "voltage source" in a sentence
Basic
Advanced
voltage source
A voltage source is the dual of a current source.
Compact electronic voltage source single phase.
Voltage source converter with improved operation.
In this work a power voltage source is investigated.
The voltage source is preferably an electric battery.
Never measure resistance across a voltage source.
A voltage source is then connected to the coils.
It can be connected to a voltage source not shown.
The voltage source may include a substation.
The input is provided by the voltage source.
Voltage source consists of one or more batteries.
The grid is connected to a high voltage source.
Do not connect any voltage source to this connector.
A voltage source supplies the first input voltage.
Never connect the measuring cables to a voltage source.
See also
A system with voltage source frequency inverters is studied.
Never connect the measuring inputs to a voltage source.
The voltage source is connected to the probes or plates.
Verify the meter operation on a known voltage source.
The voltage source can be a direct current battery.
Current source instead of a voltage source.
Current and voltage source facilities can be selected independently.
A word generator is used as the periodic voltage source.
A high voltage source for the initial injection of particles.
These two nodes are connected through a voltage source.
Connect power cord to voltage source and test lamp.
A polarized switch is coupled to a load driven by a voltage source.
A battery may be modeled as a voltage source in series with a resistance.
A patterned electret could operate as this voltage source.
The second reference voltage source delivers a fixed potential.
Circuit with two resistors and a voltage source.
The forming of such a voltage source can be relatively complex.
Energy is also fed back to this voltage source.
Both multimeter and voltage source may be damaged in this case.
But each resistor only sees the voltage source.
High voltage source can be positioned near the device to be tested.
The negative pole of the voltage source is earthed.
Therefore it is important never to connect LEDs directly to a voltage source.
This eases the connection of a voltage source to the terminals.
A capacitor and a resistor are connected in series across a voltage source.
So we have a voltage source.
Is being pushed out of the positive terminal of the voltage source.
This reference voltage source is adapted to low voltage power supplies.
Below is a circuit consisting of a voltage source and a resistor.
A high voltage source is enclosed in the holder for ion generation.
Never connect the probes across a voltage source in parallel.
The direct voltage source may be obtained by rectifying an ac mains supply.
Baring the wires and putting a voltage source in parallel.
The voltage source.
Symmetrical polyphase voltage source.
You'll also be interested in:
Examples of using Source
Show more
Funding source of related master plan project
I was soon to learn the source of her desperation
Reset a source button on the remote control
Examples of using Voltage
Show more
Voltage drop due to use of extension cable
Information on the voltage is on the rating plate
Voltage measure switch for phase voltage
