Examples of 'volumetric flask' in a sentence
Meaning of "volumetric flask"
volumetric flask - A laboratory glassware that is used for measuring accurate volumes of liquids, typically having a flat bottom, a long neck, and a precise volume measurement mark
Show more definitions
- A glass flask used in a laboratory for holding chemical liquids and solutions. They are similar in shape to a Florence flask, but with a longer neck and wider flat bottom. The neck is marked so that a particular volume of liquid can be measured with high precision.
How to use "volumetric flask" in a sentence
Basic
Advanced
volumetric flask
Volumetric flask with synthetic coating.
Bulk to volume of volumetric flask and mix thoroughly.
A volumetric flask is for general mixing and titration.
You would not apply heat to a volumetric flask.
A volumetric flask of a methylene blue solution.
How to prepare a standard solution with a volumetric flask.
Cap the volumetric flask and mix well.
The second portion was contained in a transparent volumetric flask.
Volumetric flask with stopper.
Solution into the volumetric flask.
Fill the volumetric flask to volume and mix well.
The buffer was diluted to two liters in a volumetric flask.
A volumetric flask was charged with varying amounts of the surfactant.
The solution is then transferred and adjusted in a volumetric flask.
The volumetric flask is filled up to the mark with ethyl acetate.
See also
A measured sample of the filtrate was then placed in a volumetric flask.
The volumetric flask is then filled to volume with dilution solvent.
The tobacco slurry is centrifuged and decanted into a volumetric flask.
Each skin sample was placed into a volumetric flask and tretinoin was extracted.
Then the volumetric flask is diluted to the mark with deionized water.
The washings were transferred into the volumetric flask and completed to volume.
The volumetric flask was then filled to the mark with deionized water.
Rinse the sample with demineralized water adding to the volumetric flask.
A tablet is placed in a volumetric flask or container filled with a known amount of tap water.
Repeat the extraction combining the aqueous layers in the volumetric flask.
The volumetric flask was made up to volume using distilled water stored at room temperature.
The cap and vial are rinsed with acetonitrile into the volumetric flask.
Fill the volumetric flask with high purity water to the marked line.
Such a flask has a wide mouth and known as a Kohlrausch volumetric flask.
The filled volumetric flask was inverted at least six times to ensure adequate mixing.
Rinse the KPVS quantitative into the volumetric flask.
The volumetric flask then was brought to volume with mobile phase and mixed well.
The extract was transferred into a 5 mL volumetric flask.
Volumetric flask without coating The PUR coating envelops the volumetric flasks like a protective skin.
The buffer was diluted to 2 liters in a volumetric flask.
Transfer to a 1 liter volumetric flask and dilute to the mark.
Mg of apomorphine were weighed into a 5 ml volumetric flask.
Volumetric flask - for preparing liquids with volumes of high precision.
The resulting supernatant was carefully transferred to a 2 ml volumetric flask.
The volumetric flask with 3 marks is used to check the functioning of a dispenser.
The weighing boat was then placed in a volumetric flask and 50 ml acetonitrile added.
Using a volumetric flask and an analytical balance, the density of ethanol can be determined.
Quantitatively transfer sample to 25 mL volumetric flask and dilute to volume with water.
The filtrate and the rinsing water are collected and adjusted to 50 mL in a volumetric flask.
Transfer the solution to a one-litre volumetric flask and make up to one litre.
Stir until all is dissolved and transfer the solution quantitatively to a 1 litre volumetric flask.
Transfer quantitatively the solution to a 1 l volumetric flask and add up to the mark with water.
The solid solute must be carefully weighed and transferred quantitatively ( completely ) to a volumetric flask.
V = volume of volumetric flask used in mL F = dilution factor for second dilution.
Allow to cool and transfer quantitatively to a 50 ml volumetric flask and make up to volume.
You'll also be interested in:
Examples of using Volumetric
Show more
Specifications for volumetric and mass flowmeters
Volumetric error limits for repetitive pipette
Clear identification of the volumetric instrument to be tested
Examples of using Flask
Show more
He took a kind of flask out of his pocket
The flask is actually filled with oxygen
I told you that flask was not mine
