Examples of 'washer and nut' in a sentence
Meaning of "washer and nut"
washer and nut: a pairing of a flat ring-shaped disk and a fastening device with a threaded hole, often used together in construction or machinery
How to use "washer and nut" in a sentence
Basic
Advanced
washer and nut
Secure with washer and nut supplied.
Secure the bolt using the washer and nut.
Place washer and nut and tighten securely.
Fix it with provided washer and nut.
This washer and nut are used to clamp the puller to the bearing.
Room head bolt and washer and nut.
Assemble the washer and nut flush with the end of anchor to protect threads.
A countersunk interfaz is also located between a washer and nut.
Replace axle sleeve washer and nut and tighten nut.
Replace button head screw and tighten with washer and nut.
Washer and Nut.
Install glass bowl using rubber washer and nut provided.
Add carriage bolts from the inside and secure each with a lock washer and nut.
Once in place, the lock washer and nut are then tightened.
Attached casters with two metal axles with washer and nut.
See also
Remove the shoulder bolt, washer and nut from the mounting bracket on the boom assembly.
The blade can now be replaced and the washer and nut reassembled.
Set the handle B on the longest bolt and finger tighten with the washer and nut.
Attach black wire, round washer, star washer and nut IN THIS ORDER to right post.
Attach the pendant cap to the loudspeaker using the eyebolt, lock washer and nut.
Secure with washer and nut Figure 4.
Put starter cable onto post and re-install washer and nut.
Replace button head screw and tighten with washer and nut until securely fastened.
Lift opener and fasten to hanging brackets with screw, lock washer and nut 4.
Includes bolt, lock washer and nut.
Screw fastening, loose - 2 separate screw fasteners, with washer and nut.
With threaded rod, washer and nut.
Insert axle into frame and secure it with a 1/2 ″ lock washer and nut.
Secure each location with a flat washer, lock washer and nut provided.
Mount the fan eyelet over the nut followed by ( 1 ) mounting bracket, washer and nut.
Fit the spinner backplate, propeller, propeller washer and nut on the engine.
Install the Prop adapter, propeller, prop washer and nut.
After that fix the cover plate ( 3 ) with the washer and nut.
You'll also be interested in:
Examples of using Nut
Show more
I am kind of a hard nut to crack in that department
A nut who knows a lot about bombs
Loosen the bottom nut to eliminate water
Examples of using Washer
Show more
Insert washer and thread nut to screw
The following is a guide to using your washer
This pressure washer is designed for cold
