Examples of 'weld bead' in a sentence
Meaning of "weld bead"
weld bead: A line of metal resulting from the process of welding, often used in industrial or manufacturing contexts
How to use "weld bead" in a sentence
Basic
Advanced
weld bead
Weld bead does not penetrate base metal.
This comprises voids in the weld bead.
The weld bead is then inspected.
A low frequency achieves a greater weld bead width.
The weld bead obtained is thus of better quality.
Sample in the on the weld bead.
Weld bead width is typically twice the diameter of the electrode.
Susceptibility to cold cracking under the weld bead.
The effect of undercut and weld bead geometry on fatigue strength.
Orientation and length of weld bead.
A single weld bead was deposited in the base of the weld prep.
The evaluation was made on the backside weld bead.
A second weld bead would then be placed on the opposite side.
Total crack length relative to the weld bead length.
A weld bead can be produced at any location along a shaft of the grid.
See also
Longitudinal cracks run along the length of a weld bead.
There is essentially zero weld bead extending outside the welded corner.
This in particular optimises the homogeneity of the weld bead.
Do not touch the hot weld bead or weld puddle until fully cooled.
The level of residual stress was measured in the weld bead.
This weld bead involves the entire thickness of the parts or metal plates.
A wrong flow setting can cause defects in the weld bead.
The external weld bead can be produced by the submerged arc welding method.
A sweep is thus made over the width of the weld bead.
This is why the weld bead deteriorates the exterior appearance of the body.
The adhesive layer is then exposed on the cover at the weld bead.
In the weld deposition process the weld bead needs to be deposited onto a solid surface.
Scattering of molten metal particles that cool to solid form near weld bead.
A weld bead that fastens said source against the outer wall of the inner pipe.
Failure of weld metal to fuse completely with base metal or a proceeding weld bead.
Placing a weld bead in said peripheral grooves ;.
The selected configuration has the important effect on the final properties on the weld bead.
The weld bead varies in width, and has a wavy appearance.
Lightly tap the slag with the hammer and break it loose from the weld bead.
If the weld breaks, the internal weld bead can be inspected.
A reduction of Si content will increase the coefficient of thermal expansion of the weld bead.
These small Grinders are very efficient for grinding weld bead and leaving a fine finish.
The weld bead is the orange, molten metal behind the arc.
That geometry is substantially characterized by the connection radius R of the weld bead.
In this manner, gravity effects on a deposited weld bead may be reduced or eliminated.
Process according to claim 1, the space of which is hermetically sealed by a weld bead.
The nozzle and the neck are secured by a weld bead at the bearing surfaces ;.
The width of the weld bead shall be got by little and even oscillating movements ;.
Restated, there is essentially no weld bead.
The weld bead geometric features evaluated were width, reinforcement height and penetration depth.
Thus, more stable and spatter-free welding and a more uniform weld bead are obtained.
Once weld bead is complete, remove excess and splatters using a chipping hammer or wire brush.
Longitudinally, the light guide extends along the trajectory which defines the weld bead.
The continuous peripheral weld bead 7 provides sealing for the cavity formed between the sheets 1.
A - Susceptibility to cold cracking under the weld bead in structural steels.
You'll also be interested in:
Examples of using Bead
Show more
See if we can get a bead on these shooters
Weld bead does not penetrate base metal
In these case the bead breaker is ideal
Examples of using Weld
Show more
Do not weld with worn or loose wires
This contamination could weaken the weld
Weld bead does not penetrate base metal
