Examples of 'weld can' in a sentence
Meaning of "weld can"
weld can: a phrase that may denote a welder's ability or the process of welding metals together
How to use "weld can" in a sentence
Basic
Advanced
weld can
A single weld can be effected at a given location.
The integrity of this weld can then be tested.
This weld can be continuous or discrete.
Disable conditions must be corrected before a weld can be executed.
Integrity of the weld can also not be established.
Spot welds leading to a global discontinuous weld can be considered.
This weld can be immediately checked and if necessary repaired.
Spot welds leading to global discontinuous weld can also be considered.
The weld can be finished with simpler welding means.
Take in mind that overpressure on the weld can influence the quality of the weld.
The weld can be made with or without the supply of material.
The problem is that the quality of the weld can fluctuate when electrodes are replaced.
The weld can extend all the way across the width of the bucket.
This patent document mentions that a tight weld can be obtained in particular by laser welding.
A weld can thus burst apart as a result of an increased air pressure inside the bar.
See also
In other embodiments, a tack weld can be added.
The resulting weld can be as strong as the original materials.
If using galvanized material, additional galvanizing of the weld can be ordered.
The weld can be shot peened to homogenize the weldment and heat affected zone.
Moreover, the fillet weld can be performed easily.
By melting two pieces of metal together, an autogenous weld can be created.
How much of the factory weld can be ground down without risking the bones to.
Also, a non-destructive examination of the replacement tube end to tube weld can be preferably performed.
Check out how Pro Weld can assist in making your home family friendly.
In that case, the whole circumferential weld can be examined in one go.
Alternately, the weld can be formed ultrasonically or by a hot air weld nozzle.
As a variant, a mirror type weld can also be envisaged.
The weld can be formed by a continuous, neat, even flow.
The X-ray probe can then be inserted and the weld can be inspected.
For instance, the weld can be replaced by adhesive.
Thus, a greatly reduced and / or lower quality weld can be employed.
Unfortunately, such a weld can be subject to fatigue and failure.
The weld can be set back from the periphery ( hinge weld ).
Weld on backing strip Note: The angle weld can be performed as a “chain-weld”.
This weld can be made by heating forward part 13 of the projectile locally.
If necessary, a defective or doubtful weld can be repaired immediately following its inspection or testing.
The weld can be the most life-limiting part in a reactor pressure vessel (RPV).
Alternatively, a mechanical screw or weld can be used to fastening the protective sleeve 60 in place.
Thereafter, a full heat weld can be applied to secure the pull tab in position.
The sealing of this butt weld can itself be inspected by X-rays without difficulty.
Check out how Pro Weld can make your rooftop terrace the place to be!
