Examples of 'wheel bracket' in a sentence
Meaning of "wheel bracket"
wheel bracket - a bracket or support structure used to hold a wheel in place, often found in vehicle or machinery parts
How to use "wheel bracket" in a sentence
Basic
Advanced
wheel bracket
Mount complete wheel bracket assembly as shown.
Insert the wheel assembly into the wheel bracket.
Slide the tail wheel bracket on the wire.
The wheel bracket is pivotably connected to the connecting unit.
Remove the fan and take out the wheel bracket.
Slide the wheel bracket assembly all the way down.
Remove the clevis pin from the wheel bracket and wheel.
Attach the tail wheel bracket to the fuselage using the hardware listed.
The linear guide assembly also includes a steering bracket coupled to a wheel bracket.
Place threaded end of bolt through wheel bracket on base of air tank.
Over time the wheel bracket is wearing down leading to high replacement costs.
Remove the locking pin from the gauge wheel bracket and cab bracket.
The wheel bracket includes a pivotal portion coupled to the lower end of the central shaft.
Rotate the assembly until it locks into the clamps moulded into the tail wheel bracket.
Align the hole in the wheel bracket with the desired hole in the.
See also
The wheel bracket is configured to support the wheel associated with the respective wheel assembly.
Cultivator blades, depth skid and wheel bracket.
Mount wheel on wheel bracket as shown on figure 1.
In the particular emobdiment illustrated, gaging portion 134 is coupled to a wheel bracket.
When properly tightened, the wheel bracket will be tight against the base.
The auxiliary wheel 25 is rotatably mounted to a lower end of the wheel bracket 21.
Slide the wheel bracket assembly down for shallower penetration, and up for deeper tine penetration.
To align correctly, the bolts holding the wheel bracket may have to be loosened.
Secure bottom pole ( 7 ) to tank and wheel bracket as shown, a deep socket is recommended.
This polymer board may be attached to a monolithic wheel bracket and kick plate 250.
The wheel toe of the associated wheel bracket 26 is next measured.
X Secure the faulty wheel in the spare wheel bracket Y page 186.
Take wheel spindle ( A ) and thread into wheel bracket ( B ), which is welded to compressor frame.
X Remove the spare wheel from the spare wheel bracket Y page 186.
Slide axle ( item 13 ) through the wheel bracket on the carrier.
A follower wheel 21 is rotatably supported on the left wheel bracket 13L through a rotation shaft 19.
You'll also be interested in:
Examples of using Bracket
Show more
Secure bracket to floor using screws supplied
Screw the metal bracket into place
Bracket and screws for server racks
Examples of using Wheel
Show more
The tiny wheel actually does have chores
He could barely see over the wheel
Wheel bearings are clean and free of moisture
