Examples of 'when the screw' in a sentence
Meaning of "when the screw"
when the screw - This phrase is often used in a context where a mistake or problem occurs, similar to the idea of when something goes wrong or breaks down, especially in machinery or equipment
How to use "when the screw" in a sentence
Basic
Advanced
when the screw
Reached when the screw can be pushed in.
Tilt the air duct downwards when the screw is loose.
When the screw is tightened stronger.
It is normal when the screw is rotating.
When the screw is rotated further the ridges loose contact with the depressions.
Rotate the knob in direction when the screw head is too high.
When the screw is turned the compressor plate compresses the sealing compound around the cable.
The variant without clamp lever is clamped when the screw is tightened.
When the screw compressor is started, the main engine is inhale.
The hopper does not close properly when the screw does not fit in completely.
When the screw is turned, the indicia carrier is caused to tilt.
Do not turn the tool forcibly when the screw has fully rotated.
When the screw is sticking up quite a ways, increase the clutch setting.
Piece and the tool will automatically stop when the screw is flush to the workpiece.
When the screw fittings are being screwed in, these cable inlets are broken out automatically.
See also
Never press down the piston when the screw cap is screwed on!
When the screw is tightened stronger than the recommended tightening torque, it may strip.
Could that have been caused when the screw dropped when we were plating?
When the screw or the nut rotates, the rollers are displaced axially in the nut.
The alignment means prevent relative angular movement between the parts when the screw 60 is tightened.
Therefore, when the screw seat is planar the underside of the screw is also planar.
The shim 57 is moreover in axial abutment against the tube when the screw 64 is tightened.
Thus, when the screw is assembled in locking ring, the ridges sit in the depressions.
The adjusting cam 1 may pivot relative to the block 5 when the screw 6 is loosened.
When the screw cap is removed, the stopper is also removed from the bottle.
The piston 19 is thus guided axially and prevented from rotating when the screw 17 is rotated.
When the screw is finger tight, check that the blade is centered and fully seated.
IMPORTANT, When the screw feels tight, tighten it an additional quarter-turn.
When the screw moves forward, both resin compositions are injected into the cavity of a mold.
When the screw is released, the adjusting element can slide inside the movable frame.
When the screw is inserted through the front, it will engage with the thread member.
When the screw actuating means 38 has been screwed outwardly into the position shown in Fig.
When the screw is turned, the spacer is un-expanded.
When the screw 16 is tightened, the seal is compressed and the notch is filled in.
When the screw cap is twisted and removed sleeve 18 slips off the container intact, Fig.
When the screw 5 is to be unscrewed, the locking nut 15 has to be loosened first.
You'll also be interested in:
Examples of using When
Show more
Louis did it for free when he fixed my tattoo
When you deposit tuppence in a bank account
Some people laugh when they are drunk
Examples of using Screw
Show more
Tighten the screw through the clips
Screw the two sections of pole together
Remove the screw on the rear coupler
