Examples of 'width dimensions' in a sentence
Meaning of "width dimensions"
width dimensions: This phrase refers to the measurement of the distance across an object or space, usually in relation to its other dimensions such as length or height
How to use "width dimensions" in a sentence
Basic
Advanced
width dimensions
Width dimensions were measured from hinge to hinge.
Available on request to all length and width dimensions.
The width dimensions are marked on the instructions.
We will count off the length and width dimensions.
Width dimensions include the base.
Listed below are required height x width dimensions for decorator panels.
Width dimensions were measured from trim edge to trim edge.
The thickness is negligible compared with the length and width dimensions.
Width dimensions were measured from hinge edge to clip edge.
The question of height and width dimensions of the various staircase steps is important.
The sheeting can be cut to desired length and width dimensions at this time.
The height and width dimensions of the spiroid may also be adjusted.
The material may then be reduced to the desired length and width dimensions by cutting.
Also make sure that the width dimensions at both ends are the same.
Width dimensions shown represent the distance from the outside trim to outside trim.
See also
The radial dimensions increase and the width dimensions in the circumferential direction decrease.
The width dimensions for page components will be as follows,.
The pictures are substituted to the text having initial height and width dimensions without scaling.
The length and width dimensions of this spring have been designated by X and Y.
However, all the boxes are of identical width dimensions and length dimensions.
The total width dimensions of the whole unit may be no greater than 2 micrometers.
What are the height and width dimensions of this screen?
Advantageously, the side panel and the overlapping side flap are of substantially equal width dimensions.
Therefore, your width dimensions would double.
The filtering should be applied for the additional columns for block width dimensions greater than 4.
Overall height and width dimensions remained unchanged, while length increased by 4 mm.
The cutting insert 12 has three width dimensions.
In some cases the height and width dimensions are substantially nine and eleven inches, respectively.
However, the stiffener 46 may have any suitable structure and width dimensions.
The engine block 's height and width dimensions comparable to an A4 size sheet of paper.
Width dimensions of the saddle,.
Preferably coverstock 10 has length and width dimensions greater than that of the absorbent core assembly 42.
Lane width dimensions and film basis weights are provided in Table 2, below.
Transverse axes " x " and " z " correspond to the height and width dimensions of needle body 12, respectively.
However, other width dimensions for the first regions 60 may be suitable.
Adhesive-like material layer 26 and release film layer 32 may have the same length and width dimensions.
The width dimensions of depression 24D can vary across the breadth of the conjugate bonding member 24.
The length and width dimensions of the sample stream are approximately 80µ x 5.0µ.
You'll also be interested in:
Examples of using Width
Show more
Set the width to suit your personal
Apply a border and select a border width
Overall width depends on the seat width
Examples of using Dimensions
Show more
Power pack cutout dimensions model width d e
Dimensions will bleed into each other
Stabilization of the dimensions of the loading units
