Examples of 'workpiece surface' in a sentence
Meaning of "workpiece surface"
workpiece surface: This phrase refers to the outermost layer or area of a piece being worked on, often in the context of crafting or manufacturing
How to use "workpiece surface" in a sentence
Basic
Advanced
workpiece surface
Not use water on the workpiece surface.
Workpiece surface when you turn the tool on or off.
Excellent finishing quality of the workpiece surface.
Excellent workpiece surface finish thanks to high cutting data.
Between the disc and the workpiece surface.
The full workpiece surface is in constant contact with an abrasive wheel.
A cage senses the location of the workpiece surface.
Damage to the tool or the workpiece surface and injury to the operator may result.
Then gently place the tools on the workpiece surface.
To damage the wood workpiece surface through contact with the metal screw head.
Then gently place the tool on the workpiece surface.
Advantageously the mapping of the workpiece surface can be obtained aside from the lightening operations.
Screws are driven too deep into the workpiece surface.
Gently apply the tool to the workpiece surface and move the tool forward and back.
Blade point positioned just above the workpiece surface.
See also
Heating speed, the workpiece surface oxidation decarbonization lighter.
Make sure any dirt is washed off the workpiece surface.
Perfect workpiece surface without damage to the surface-near zone and high shape accuracy.
Vibrations are minimized for greater workpiece surface and printed quality.
Deployment mechanism for passive normalization of a probe relative to a workpiece surface.
Finishing treatments can affect the workpiece surface in a wide variety of manners.
For corrosion prevention of any regular and irregular workpiece surface.
Apply uniform pressure against the workpiece surface until the screw is driven in.
Abrasive flaps have been provided on this annular surface to abrade a workpiece surface.
The coarser abrasive material and the workpiece surface have less friction and less heat.
The shoe cover is used to prevent marring and scratching of the workpiece surface.
How to achieve a better workpiece surface condition?
Under certain conditions this results in the formation of waviness on the workpiece surface.
Bringing into frictional contact a workpiece surface and said abrasive article ; and.
This improves the security when turning and the quality of the workpiece surface.
To reduce the potential for workpiece surface splintering, the anti-splintering device can be used.
The laser projects the line of cut on the workpiece surface.
This deformation engages the inner ( rear ) workpiece surface and initiates a clamping of the workpieces.
Then move the tool gently forward on the workpiece surface.
Thus, most of oxide scale on the workpiece surface is formed during the hot-rolling process.
The apparatus comprises at least two inductors for inductive heating of the workpiece surface.
A holder for holding the workpiece having said workpiece surface of predetermined maximum size ;.
The working surface of the finishing tool must conform to the desired workpiece surface.
Additionally, the surface finish associated with the workpiece surface is reduced after this refining process.
Move the tool forward keeping the side blades flush with the workpiece surface.
The vibration components perpendicular to the workpiece surface are visible in the shading Figure 4.
This loose relationship has limited the effectiveness of the flaps in abrading the workpiece surface.
Four, the workpiece surface.
Larger distances between paths ensure lower milling times and an improved workpiece surface quality.
Set the angle in relation to the workpiece surface at approximaately 5 to 45 degrees.
The workpiece engaging surface of the horn undergoes vibratory motion normal to the workpiece surface.
The powder particles will be held on the workpiece surface ( 58 ) by means of electrostatic forces.
Large stopovers between paths reduce the cutting time and improve the workpiece surface finish.
An apparatus for finishing a workpiece surface using magnetorheological fluid ( 16 ), comprising,.
The process produces no heat damage to the workpiece surface or edges.
You'll also be interested in:
Examples of using Workpiece
Show more
Check that the workpiece is properly supported
Place the saw shoe on the workpiece
And support the workpiece to a stable platform
Examples of using Surface
Show more
An uneven surface increases the risk of overturning
Where ϑ is the measured test surface temperature
All feasible surface and subsurface ECVs
